2507 S32750 duplex stainless steel wire 1mm -5mm Super Duplex SS 32750

Product Detail

2507 S32750 duplex stainless steel wire 1mm -5mm Super Duplex SS 32750

Duplex Alloy 2507 Stainless Steel Wire UNS S32750

DUPLEX ALLOYS 2507 ALLOY DESCRIPTION

Duplex 2507 is a super duplex stainless steel with high strength and good corrosion resistance. It has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefﬁcient of thermal expansion. The high chromium, molybdenum and nitrogen levels provide excellent resistance to pitting, crevice and general corrosion. The impact strength is also high. Duplex 2507 is not recommended for applications which require long exposures to temperatures above 600°F (316°C). Both toughness and corrosion resistance can be reduced. Specifications of Super Duplex Steel Wire: Specifications : ASTM A580, Q_YT 101-2018 Grade:2205, 2507, S31803, S32205, S32750 Wire diameter : 0.1 to 5.0mm Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Surface: Bright, Dull Delivery state: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard S32750 Duplex Steel Wire Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Ni	Mo	N	Cu
S32750	0.03 max	1.2 max	0.80 max	0.03 max	0.010 max	24.0 – 26.0	6.0- 8.0	3.0 – 5.0	0.24 – 0.32	0.50 max

2507 Duplex Steel WIRE MECHANICAL & PHYSICAL PROPERTIES:

Tensile Strength	700 -900MPa
Elongation (Min)	30 %

China 2507 Stainless Steel Strip

Stainless steel strip can be made by cold rolling, including the thickness of 0.31-3.0 mm sheet.

Product	Stainless Steel Strip
Material Type	Ferrite stainless steel, magnetic; Austenitic stainless steel, Non-magnetic.
Material Origin	TISCO, BAOSTEEL, JISCO, LISCO, BAOSTEEL, DINGXIN
Grade	430, 410S, 409L, 201, 304
Technology	Cold Rolled
Thickness	0.17mm to 2.0mm
Width	10mm to 250mm
Surface	2B, 2D, BA, NO.4, HL, SB
Edge	Slit / Trim Edge
Other Service	Leveling: improve flatness, esp. for items with high flatness request.
Other Service	Skin-Pass: improve flatness, higher brightness
Protection	1. Inter paper available
Protection	2. PVC protecting film available
** The sizes or thicknesses of stainless steel coil can be customized.
** All standard products are supplied without inter paper & film. If needed, please inform.

Product Specification

Finish	Thickness	Characteristics	Applications
No. 1	3.0mm~50.0mm	Finished by hot-rolling, annealing and pickling, characterized by white pickled surface	Chemical industry equipment, Industrial tanks
No. 2B	0.3mm~6.0mm	Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface	General Application Medical Instruments, Tableware
No. BA (Bright Annealed)	0.5mm~2.0mm	Bright heat treatment after cold rolling	Kitchen utensil, kitchen ware, architectural purpose
No. 4	0.4mm~3.0mm	Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes	Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8	0.5mm~2.0mm	A mirror-like reflective surface by polishing with finer abrasives over 800 mesh	Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line)	0.4mm~3.0mm	Finished by continuous linear polishing	Architectural purposes, escalators, kitchen ware vehicles

Chemical composition

Grade	C	Si	Mn	P	S	Cr	Ni	Mo	Ti	N	Cu	Nb
201	≤0.15	≤1.0	5.50-7.50	≤0.05	≤0.03	16.00-18.00	3.50-5.50	-	-	0.05-0.25	-	-
202	≤0.15	≤1.0	7.50-10.00	≤0.05	≤0.03	17.00-19.00	4.00-6.00	-	-	0.05-0.25	-	-
301	≤0.15	≤1.0	≤2.0	≤0.045	≤0.03	16.00-18.00	6.00-8.00	-	-	≤0.1	-	-
302	≤0.15	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	8.00-10.00	-	-	≤0.1	-	-
303	≤0.15	≤1.0	≤2.0	≤0.2	≥0.15	17.00-19.00	8.00-10.00	≤0.6	-	≤0.1	-	-
304	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	8.00-10.00	-	-	-	-	-
304L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	-	-	-
304H	0.04-0.1	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	-	-	-
304N	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	0.10-0.16	-	-
304J1	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	6.00-9.00	-	-	-	1.00-3.00	-
305	≤0.12	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	10.50-13.00	-	-	-	-	-
309S	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	22.00-24.00	12.00-15.00	-	-	-	-	-
310S	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	24.00-26.00	19.00-22.00	-	-	-	-	-
316	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	-	-	-
316L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	12.00-15.00	2.00-3.00	-	-	-	-
316H	≤0.1	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	-	-	-
316N	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	0.10-0.16	-	-
316Ti	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	16.00-19.00	11.00-14.00	2.00-3.00	≥5C	-	-	-
317L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	11.00-15.00	3.00-4.00	-	-	-	-
321	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	5C-0.7	-	-	-
347	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	-	-	-	10C-1.10
347H	≤0.1	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	-	-	-	8C-1.10
2205	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	21.00-24.00	4.50-6.50	2.50-3.50	-	0.08-0.20	-	-
2507	≤0.03	≤0.8	≤1.2	≤0.035	≤0.02	24.00-26.00	6.00-8.00	3.00-5.00	-	0.24-0.32	-	-
904L	≤0.02	≤1.0	≤2.0	≤0.045	≤0.03	19.00-23.00	23.00-28.00	4.00-5.00	-	-	1.00-2.00	-
C276	≤0.02	≤0.05	≤1.0	-	-	14.00-16.50	Other	-	-	-	-	-
Monel400	≤0.3	≤0.5	≤2.0	-	≤0.024	-	≥63	-	-	-	28-34	-
409L	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	17.00-19.00	-	-	-	-	-	-
410	≤0.15	≤1.0	≤1.0	≤0.035	≤0.03	11.50-13.50	-	-	-	-	-	-
410L	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	11.50-13.50	-	-	-	-	-	-
420J1	0.16-0.25	≤1.0	≤1.0	≤0.035	≤0.03	12.00-14.00	-	-	-	-	-	-
420J2	0.26-0.40	≤1.0	≤1.0	≤0.035	≤0.03	12.00-14.00	-	-	-	-	-	-
430	≤0.12	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	-	-	-	-	-
436L	≤0.025	≤1.0	≤1.0	≤0.035	≤0.03	16.00-19.00	-	-	-	-	-	-
439	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	-	-	-	-	-
440A	0.60-0.75	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
440B	0.75-0.95	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
440C	0.95-1.2	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
441	≤0.03	0.2-0.8	≤0.7	≤0.03	≤0.015	17.50-18.50	-	≤0.5	0.1-0.5	≤0.025	-	0.3+3C-0.9