Typical alloy: 5005 aluminum coil
Material status: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114
Thickness (mm): 0.1-8mm
Width (mm): 100-2650
Typical products: high-end curtain wall panels, cooking utensils, instrument shells, building decoration parts, oxide materials, etc.
Introduction to 5005 aluminium coil
The strength of the 5005 aluminium coil is comparable to that of the 3003, with good weldability and good workability. The 5005 aluminum alloy is similar to the 3003 alloy, with moderate strength and good corrosion resistance. The anodized film of 5005 coil is brighter than that of
3003 aluminum coil, and is in harmony with the color tone of the 6063 alloy.
Application range of 5005 aluminum coil
5005 aluminum coils are often used as conductors, cookware, instrument panels, shells and building decoration parts, interior and exterior materials for building materials, interior materials for vehicles, etc.
Chemical composition of 5005 aluminum coil
| Si |
Cu |
Mg |
Zn |
Mn |
Cr |
Fe |
Al |
| 0.3 |
0.2 |
0.5 to 1.1 |
0.2 |
0.20 |
0.10 |
0.7 |
balance |
Mechanical properties of aluminium coil 5005
| Tensile strength σb (MPa) |
Elongation δ10 (%) |
Annealing temperature |
| 100～205 |
1～8 |
345℃ |