Factory selling Brass Stainless Steel Pipe Fittings Elbow - Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112) – Cepheus

Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112)

5252/5454/5457/5657 H112 Aluminium Alloys Profiles Extrusions for Auto We have  different Aluminium and aluminium alloys extruded profiles used for motor. With different temper and different Surface treatment types: Anodizing; Anodizing+ Electrophoretic coating;powder spray coating;Liquid spray coating, etc. They are typically used for common structural parts, Collision safety parts and Other uses,etc. Common structural parts: Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc Collision safety parts: Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc. Other uses: Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc. 1)Alloy,temper and Surface treatment types of Aluminium and aluminium alloys extruded profiles used for Auto
Alloy Temper Surface treatment types
1100 O,H112 Anodizing; Anodizing+Electrophoretic coating; powder spray coating; Liquid spray coating
1200 H112
2008,2010,2036 T6
2017,2117 T4,T6
2024 T6,T8,T8510,T8511
3002,3003,3005 H112
4B01,4B91 T6
5005 F,H112,H111,O
5252,5454,5457,5657 H112
6005,6005A,6061,6463 T4,T5,T6
6106,6009,6010,6011,6016, 6151,6053,6A61,6S02 T6
6060,6063 T4,T5,T6,T64,T66
6008,6014 T4,T6
6082 O,T4,T5,T6
6A01 T5,T6
7003,7005,7129,7A46 T5,T6
7021 T6
7B05 T4,T5,T6
2)Using features of Aluminium and aluminium alloys extruded profiles used for Auto
Using features Definition Typical parts Typical alloy
Used for common structural parts It is used to form the main structure of vehicle, and ensure the overall strength, rigidity and  vehicle'function Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc 2008,2010,2036,6005,6005A,6009,6010,6011,6016,6151,6060,6061,6063,6463,6082,6A01,6S02,6A61,7005,7021,7129,7B05
Used for Collision safety parts It is used for vehicle parts to avoid further damage to passenger and other components through energy absorption and deformation during vehicle collision. Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc. 6005,6005A, 6008,6106,6014,6060,6061,6063,6082,6A01,7003,7A46
Other uses The Other parts except for the above purposes., such as decorative parts, accessories, special functional parts, etc., Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc. 1100,1200,2017,2117,2024,3002,3003,3005,4B01,4B91,5005,5252,5454,5457,5657,6005,6009,6010,6011,6016,6151,6053,6061,6063,6463,6082,7003
3)The chemical component of Aluminium and aluminium alloys extruded profiles used for Auto
Alloy Chemical component(%)
Si Fe Cu Mn Mg Cr Zn Ti Zr Other Al
 Each Total
2008 0.50-0.8 ≤0.40 0.7- 1.1 ≤0.30 0.25-0.50 ≤0.10 ≤0.25 V:0.05 ≤0.10 - ≤0.05 ≤0.15 Remain
2010 ≤0.50 ≤0.50 0.7- 1.3 0.10-0.40 0.40-1.0 ≤0.15 ≤0.30 - - - ≤0.05 ≤0.15 Remain
2036 ≤0.50 ≤0.50 2.2- 3.0 0.10-0.40 0.30-0.6 ≤0.10 ≤0.25 - ≤0.15 - ≤0.05 ≤0.15 Remain
4B01 3.8- 5.4 ≤0.40 ≤0.25 ≤0.25 0.25-0.50 ≤0.20 ≤0.07 - ≤0.15 - ≤0.05 ≤0.15 Remain
4B91 2.0- 4.0 ≤0.35 0.10-0.50 ≤0.07 0.35-1.0 0.05-0.20 ≤0.08 ≤0.20 - ≤0.05 ≤0.15 Remain
5252 ≤0.08 ≤0.10 ≤0.10 ≤0.10 2.2- 2.8 - ≤0.05 V:0.05 - - ≤0.03 ≤0.10 Remain
5457 ≤0.08 ≤0.10 ≤0.20 0.15-0.45 0.8- 1.2 - ≤0.05 V:0.05 - - ≤0.03 ≤0.10 Remain
5657 ≤0.08 ≤0.10 ≤0.10 ≤0.03 0.6- 1.0 - ≤0.05 V:0.05 Ga:0.03 - - ≤0.02 ≤0.05 Remain
6008 0.5-0.9 ≤0.35 ≤0.30 ≤0.30 0.40-0.7 ≤0.30 ≤0.20 V: 0.05-0.20 ≤0.10 - ≤0.05 ≤0.15 Remain
6011 0.6- 1.2 ≤1.0 0.40-0.9 ≤0.8 0.6- 1.2 ≤0.30 ≤0.20 - ≤0.20 - ≤0.05 ≤0.15 Remain
6022 0.8- 1.5 0.05-0.20 0.01-0.11 0.02-0.10 0.45-0.7 ≤0.10 ≤0.25 - ≤0.15 - ≤0.05 ≤0.15 Remain
6151 0.6- 1.2 ≤1.0 ≤0.35 ≤0.20 0.45-0.8 0.15-0.35 ≤0.25 - ≤0.15 - ≤0.05 ≤0.15 Remain
6053 a ≤0.35 ≤1.0 - 1.1- 1.4 0.15-0.35 ≤1.0 - - - ≤0.05 ≤0.15 Remain
6S02 0.90-1.15 ≤0.30 0.32-0.50 0.15-0.40 0.50-0.7 0.10-0.30 ≤0.08 - ≤0.05 - ≤0.05 ≤0.15 Remain
6A61 0.55-0.75 ≤0.50 0.25-0.45 ≤0.10 0.75-1.40 ≤0.30 ≤0.10 - ≤0.07 - ≤0.05 ≤0.15 Remain
7129 ≤0.15 ≤0.30 0.50-0.9 ≤0.10 1.3- 2.0 ≤0.10 4.2- 5.2 V:0.05 Ga:0.03 ≤0.05 - ≤0.05 ≤0.15 Remain
7A46 ≤0.12 ≤0.30 0.10-0.40 ≤0.10 0.9- 1.7 ≤0.06 6.0- 7.0 - ≤0.08 - ≤0.05 ≤0.15 Remain
a:Si content is the 45%-65% of actual Mg content
4)Mechanical Property at room temperature of Aluminium and aluminium alloys extruded profiles used for Auto
Alloy Supply Temper Sample Temper Wall thickness/mm Mechanical Property BH(Brinell Hardness) HBW
Tensile Strength (MPa) Yield Strength (MPa) Elongation (%)
A A50mm
1100 O O ≤25.00 75-105 ≥20 ≥22 ≥20 -
H112 H112 ≤25.00 ≥75 ≥20 ≥22 ≥20 -
1200 H112 H112 ≤25.00 ≥75 ≥25 ≥20 ≥18 23
2008 T6 T6 ≤12.50 Attached Actual Measurement -
2010 T6 T6 ≤25.00 Attached Actual Measurement -
2017 T4 T4 ≤12.50 ≥345 ≥215 - ≥12 -
>12.50-100.00 ≥345 ≥195 ≥12 - -
T6 T6 ≤12.50 Attached Actual Measurement -
2117 T4 T4 ≤12.50 Attached Actual Measurement -
T6 T6 ≤25.00 Attached Actual Measurement -
2024 T8 T8510 T8511 T8 T8510 T8511 ≤25.00 ≥455 ≥380 ≥5 ≥4 130
T6 T6 ≤12.50 Attached Actual Measurement -
2036 T6 T6 ≤25.00 Attached Actual Measurement -
3002 H112 H112 ≤25.00 Attached Actual Measurement -
3003 H112 H112 ≤25.00 ≥95 ≥35 ≥25 ≥20 30
3005 H112 H112 ≤25.00 Attached Actual Measurement -
4B01 T6 T6 ≤25.00 ≥270 ≥220 - ≥8 -
4B91 T6 T6 ≤25.00 265-365 245-345 - ≥10 -
5005 F - - - - - - -
H112 H112 ≤25.00 ≥100 ≥40 ≥18 ≥16 30
O H111 O ≤25.00 100-150 ≥40 ≥20 ≥18 30
5252 H112 H112 ≤25.00 Attached Actual Measurement -
6005 6005A T4 T4 ≤25.00 ≥180 ≥90 ≥15 ≥13 50
T5 T5 ≤6.30 ≥250 ≥200 - ≥7 -
>6.30-25.00 250 200 8 7 -
T6 T6 Solid profile ≤5.00 ≥270 ≥225 - ≥6 90
>5.00- 10.00 260 215 - 6 85
>10.00- 25.00 250 200 8 6 85
Hollow profile ≤5.00 ≥255 ≥215 - ≥6 85
>5.00- 15.00 ≥250 ≥200 ≥8 ≥6 85
6106 T6 T6 ≤10.00 ≥250 ≥200 ≥8 ≥6 75
6008 T4 T4 ≤10.00 ≥180 ≥90 ≥15 ≥13 50
T6 T6 Solid profile ≤5.00 ≥270 ≥225 ≥8 ≥6 90
>5.00- 10.00 ≥260 ≥215 ≥8 ≥6 85
Hollow profile ≤5.00 ≥255 ≥215 ≥8 ≥6 85
>5.00- 10.00 ≥250 ≥200 ≥8 ≥6 85
6009 T6 T6 ≤25.00 Attached Actual Measurement -
6010 T6 T6 ≤25.00 Attached Actual Measurement -
6011 T6 T6 ≤25.00 Attached Actual Measurement -
6014 T4 T4 ≤10.00 ≥140 ≥70 ≥15 ≥13 55
T6 T6 ≤5.00 ≥250 ≥200 ≥10 ≥8 80
>5.00- 10.00 ≥225 ≥180 ≥8 ≥6 80
6016 T6 T6 ≤25.00 Attached Actual Measurement -
6151 T6 T6 ≤25.00 Attached Actual Measurement -
6053 T6 T6 ≤25.00 Attached Actual Measurement -
6060 T4 T4 ≤25.00 ≥120 ≥60 ≥16 ≥14 50
T5 T5 ≤5.00 ≥160 ≥120 - ≥6 60
>5.00- 25.00 ≥140 ≥100 ≥8 ≥6 60
T6 T6 ≤3.00 ≥190 ≥150 - ≥6 70
>3.00- 25.00 ≥170 ≥140 ≥8 ≥6 70
T64 T64 ≤15.00 ≥180 ≥120 ≥12 ≥10 60
T66 T66 ≤3.00 ≥215 ≥160 - ≥6 75
>3.00- 25.00 ≥195 ≥150 ≥8 ≥6 75
6061 T4 T4 ≤25.00 ≥180 ≥110 ≥15 ≥13 65
T5 T5 ≤16.00 ≥240 ≥205 ≥9 ≥7 -
T6 T6 ≤5.00 ≥260 ≥240 - ≥7 95
>5.00- 40.00 ≥260 ≥240 ≥10 ≥8 95
6063 T4 T4 ≤25.00 ≥130 ≥65 ≥14 ≥12 50
T5 T5 ≤3.00 ≥175 ≥130 - ≥6 65
>3.00- 25.00 ≥160 ≥110 ≥7 ≥5 65
T6 T6 ≤10.00 ≥215 ≥170 - ≥6 75
>10.00- 25.00 ≥195 ≥160 ≥8 ≥6 75
T64 T64 ≤15.00 ≥180 ≥120 ≥12 ≥10 65
T66 T66 ≤10.00 ≥245 ≥200 - ≥6 80
>10.00- 25.00 ≥225 ≥180 ≥8 ≥6 80
6463 T4 T4 ≤25.00 ≥125 ≥75 ≥14 ≥12 46
T5 T5 ≤25.00 ≥150 ≥110 ≥8 ≥6 60
T6 T6 ≤25.00 ≥195 ≥160 ≥10 ≥8 74
6082 O O ≤25.00 ≤160 ≤110 ≥14 ≥12 35
T4 T4 ≤25.00 ≥205 ≥110 ≥14 ≥12 70
T5 T5 ≤5.00 ≥270 ≥230 - ≥6 90
T6 T6 ≤5.00 ≥290 ≥250 - ≥6 95
>5.00- 25.00 ≥310 ≥260 ≥10 ≥8 95
6A01 T5 T5 ≤6.00 ≥245 ≥205 - ≥8 -
>6.00- 12.00 ≥225 ≥175 - ≥8 -
T6 T6 ≤6.00 ≥265 ≥235 - ≥8 -
6A61 T6 T6 ≤25.00 ≥260 ≥240 - ≥8 -
6S02 T6 T6 ≤25.00 ≥315 ≥285 ≥15 ≥15 -
7003 T5 T5 ≤25.00 ≥310 ≥260 ≥10 ≥8 -
T6 T6 ≤10.00 ≥350 ≥290 - ≥8 110
>10.00- 25.00 ≥340 ≥280 ≥10 ≥8 110
7005 T5 T5 ≤25.00 ≥345 ≥305 ≥10 ≥8 -
T6 T6 ≤40.00 ≥350 ≥290 ≥10 ≥8 110
7021 T6 T6 ≤20.00 ≥410 ≥350 ≥10 ≥8 120
7129 T5,T6 T5,T6 ≤12.50 ≥380 ≥340 - ≥8 -
7A46 T5 T5 ≤25.00 ≥410 ≥390 - ≥10 -
T6 T6 ≤25.00 ≥420 ≥390 - ≥10 -
7B05 T4 T4 ≤25.00 ≥315 ≥195 - ≥11 -
T5 T5 ≤25.00 ≥325 ≥245 - ≥10 -
T6 T6 ≤25.00 ≥335 ≥275 - ≥10 -
    • Factory selling Brass Stainless Steel Pipe Fittings Elbow - Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112) – Cepheus Related Video:

    Related Products

    Good quality Stainless Steel Hex Nipp...
    Low MOQ for Stainless Steel Tube Mill...
    2017 Latest Design Perforated Stainle...
    Cheap price Super Duplex Stainless St...
    Best-Selling Special Stainless Steel ...
    Hot Selling for 316ln Stainless Steel...