Factory wholesale Stainless Steel Tee - 1.4016 (430) Sheet and Plate – Cepheus

Stainless Steel - Ferritic - 1.4016 (430) Sheet and Plate

1.4016 (430) Sheet and Plate

Stainless steel type 1.4016 is also commonly known as grade 430. Type 430 stainless steel combines good corrosion resistance with good formability and ductility. It is a ferritic, non-hardenable plain Chromium stainless steel with excellent finish quality. Grade 430 also has excellent resistance to nitric attack, which makes it well suited to use in chemical applications. The most popular applications for 430 are in domestic appliances and decorative trim.

Chemical Composition

1.4016 Steel

Chemical Element % Present
Carbon (C) 0.0 - 0.08
Chromium (Cr) 16.00 - 18.00
Manganese (Mn) 0.0 - 1.00
Silicon (Si) 0.0 - 1.00
Phosphorous (P) 0.0 - 0.04
Sulphur (S) 0.0 - 0.02
Iron (Fe) Balance

Properties

Physical Property Value
Density 7.75 g/cm³
Melting Point 1425-1510 °C
Thermal Expansion 10.4 x10^-6 /K
Modulus of Elasticity 200 GPa
Thermal Conductivity 23.9 W/m.K
Electrical Resistivity 0.060 x10^-6 Ω .m

Sheet - Up to 8mm Thick

Mechanical Property Value
Proof Stress 260 Min MPa
Tensile Strength 450 - 600 MPa
Elongation A50 mm 20 Min %

Plate - Over 8mm to 13.5mm / Thick

Mechanical Property Value
Proof Stress 240 Min MPa
Tensile Strength 450 - 600 MPa
Elongation A50 mm 18 Min %

Plate - Over 13.5mm to 25mm Thick

Mechanical Property Value
Proof Stress 240 Min MPa
Tensile Strength 430 - 630 MPa
Elongation A50 mm 20 Min %

Alloy Designations

Stainless Steel Grade 1.4016/430 also corresponds to the following designations but may not be a direct equivalent: UNS S43000 BS 430S17 EN60  

Supplied Forms

 
  • Sheet
  • Strip
  • Tube
  • Bar
  • Fittings & Flanges
  • Pipe
  • Plate

Applications

430 stainless steel is typically used in:   Low cost sinks Decorative trim White & Brown Goods (washing machines, dishwashers, cookers Refrigerators Stove element supports Scientific apparatus Fasteners Flue linings

Corrosion Resistance

Type 430 stainless steel has good corrosion resistance to a large variety of media including nitric acid and some organic acids. The corrosion resistance of type 430 is optimal when it has a highly polished surface. As with other ferritic grades, resistance to stress corrosion cracking is very high.