News

Beryllium Copper Alloy (UNS C17510)

C17510 Copper   UNS C17510 beryllium copper alloys are available in mill hardened tempers and heat treatable and ductile tempers. These alloys have moderate strength and about 50% IACS conductivity.   Chemical Composition Elements Content (%) Copper, Cu Balance Beryllium, Be 0.2... Read More

C17500 Copper (CDA 175)

C17500 Copper (CDA 175)   C17500/C17510 offers a combination of high electrical and thermal conductivity with good strength compared to most copper based alloys. C17500 alloy is the mirror image of alloy C17510 in terms of its properties and characteristics. The beryllium copper differ in th... Read More

C70600 Copper Nickel (90/10)

C70600 (C706) & C71500 (C715), Copper nickel offers excellent corrosion resistance, especially in marine salt water environments. The main, wrought copper-nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which... Read More

Fine Structure Precision Foil 301L FS (1.4310)

Fine Structure Precision Foil 301L FS (1.4310)   Proven in the industry this unique 2 micron grain 301 grade cold rolled precision foil offers superior smoothness of lasered or etched surfaces, minimised warping following half stepping, lowest internal stress and superior laser processing. ... Read More

Precision Stainless Steel

Precision Stainless Steel Foil / Sheet for SMT Stencils and Precision Etched Parts - produced to the highest technical specifications - precision and fine structure foil - gauge from 0.050 to 0.300 mm - width 600, 610 or 620 mm Read More

Precision Foil 304 HTA (1.4301)

Precision Foil 304 HTA (1.4301)   Full hard, tension annealed 304 grade cold rolled stainless steel foil meeting the highest requirements of flatness, durability and low internal stress. Mechanical Properties Hardness min. 370 Hv Tensile Strength min. 1130m N/mm ² Typical Elogngati... Read More

C54400 copper rod QSn4-4-4 CuSn4Pb4Zn4 C5441

Material Designation GB QSn4-4-4 EN CuSn4Pb4Zn4 UNS C54400 JIS C5441   Chemical Composition   Cu Rem % Pb 3.0-4.0 % Sn 3.5-4.5 % Zn 1.5-4.5 % P 0.01-0.5 % Fe ≤0.1 % Read More

440A, 440B, 440C

Common elements across all 440 steels: 16-18% chromium 1% Manganese 1% silicon 0.75% Molybdenum 0.04% Phosphorus 0.03% sulfur Some percentage of Carbon 440A steel 0.6-0.75% Carbon 440B steel 0.75-0.95% Carbon 440C steel 0.95-1.20% Carbon Read More

Stainless Steel – Grade 431 (UNS S43100)

Stainless Steel – Grade 431 (UNS S43100)   Grade 431 stainless steels are martensitic, heat-treatable grades with excellent corrosion resistance, torque strength, high toughness and tensile properties. All these properties make them ideal for bolt and shaft applications. These steels, ... Read More

CuBe2 – UNS.C17200 Beryllium Copper Alloys

CuBe2 – UNS.C17200 Beryllium Copper Alloys C17200 Beryllium Copper Cube2–C17200 (CDA 172) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryll... Read More

Beryllium Copper UNS C17200

Beryllium Copper UNS C17200   UNS C17200 beryllium copper alloys are ductile and produced in mill hardened and heat treatable tempers. These alloys are used for all applications, which require high strength, stiffness and good conductivity. The tensile strength of C17200 copper is over 1380 ... Read More

C17200 Copper (CDA 172)

C17200 Copper (CDA 172) C17200 is also known as Alloy 25 and is the most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared to commercial copper alloys. Its strength and hardness is similar to that of steel. C17200 copper’s ulti... Read More
<< < Previous 28293031323334 Next > >> Page 31 / 57