UNS S30400 Wire

Stainless Steel 304 Wire, UNS S30400 Wiremesh, SS 304 Filler Wire, SS 304 Welding Wire, SS 304 Coils

ASTM A164 Stainless Steel 304 Wire, werkstoff nr. 1.4301 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 304
UNS	S30400
WERKSTOFF NR.	1.4301
AFNOR	Z7CN18-09
JIS	SUS 304
GOST	08X18H10
BS	304S31
EN	X5CrNi18-10

 

STAINLESS STEEL 304 WIRE SPECIFICATION :

Standard : 304 / 1.4301 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S30400 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
304	0.08 max	2 max	0.75 max	0.040 max	0.030 max	18 – 20	-	8 – 11	-

STEEL 304 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1400 °C (2550 °F)
Tensile Strength	Psi – 75000, MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000, MPa – 205
Elongation	35 %

TYPES OF STAINLESS STEEL 304 WIRE :

Stainless Steel 304L Wire, UNS S30403 Wiremesh, SS 304L Filler Wire, SS 304L Welding Wire, SS 304L Coils

ASTM A164 Stainless Steel 304L Wire, werkstoff nr. 1.4306/1.4307 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 304L
UNS	S30403
WERKSTOFF NR.	1.4306/1.4307
AFNOR	Z3CN18-10
JIS	SUS 304L
GOST	03X18H11
BS	304S11
EN	X2CrNi18-9 / X2CrNi19-11

 

STAINLESS STEEL 304L WIRE SPECIFICATION :

Standard : 304L / 1.4306 / 1.4307 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S30403 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
304l	0.035 max	2 max	0.75 max	0.040 max	0.030 max	18 - 20	-	8 - 13	-

STEEL 304L WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1400 °C (2550 °F)
Tensile Strength	Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset)	Psi - 30000 , MPa - 205
Elongation	35 %

TYPES OF STAINLESS STEEL 304L WIRE :

ASTM A164 Stainless Steel 310 Wire, werkstoff nr. 1.4841 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 310
UNS	S31000
WERKSTOFF NR. / DIN	1.4841

 

STAINLESS STEEL 310 WIRE SPECIFICATION :

Standard : 310 / 1.4841 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S31000 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
310	0.25 max	2 max	1.50 max	0.045 max	0.03 max	24 – 26	-	19 – 22	-

STEEL 310 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

TYPES OF STAINLESS STEEL 310 WIRE :

 

Stainless Steel 310S Wire, UNS S31008 Wiremesh, SS 310S Filler Wire, SS 310S Welding Wire, SS 310S Coils

ASTM A164 Stainless Steel 310S Wire, werkstoff nr. 1.4845 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 310S
UNS	S31008
WERKSTOFF NR. / DIN	1.4845

   

STAINLESS STEEL 310S WIRE SPECIFICATION :

Standard : 310S / 1.4845 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S31008 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
310S	0.08 max	2 max	1.50 max	0.045 max	0.03 max	24 – 26	-	19 – 22	-

 

STEEL 310S WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi – 75000, MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000, MPa – 205
Elongation	35 %

TYPES OF STAINLESS STEEL 310S WIRE :