309 / 1.4833 / S 30908

309 / 1.4833 / S 30908  

SPECIFICATIONS

UNS No. (309):
UNS S30900
W. No. (309):
1.4828
Standards (309):
ASTM A167
:
UNS S30908
W. No. (309S):
1.4833
Standards (309S):
ASTM A240, AMS 5523

Description:

Types 309 Stainless Steel and 309S are austenitic chromium-nickel stainless steels that provide excellent corrosion resistance and heat resistance plus good strength at room and elevated temperatures. Type 309S Stainless Steel is identical to Type 309 except for a lower carbon content that minimizes carbide precipitation and improves weldability. They are essentially nonmagnetic as annealed and become lightly magnetic when cold worked.

Product Forms:

Sheet, Strip

Specifications:

ASTM A167 (309), ASTM A240 (309S)

Typical Applications:

furnace parts, heating elements, aircraft and jet engine parts, heat exchangers, sulfite liquor handling equipment, kiln liners, boiler baffles, refinery and chemical processing equipment, and auto exhaust parts

Chemical Composition: (A167, A240)

Element Type 309 Type 309S
Carbon 0.20 max. 0.08 max.
Manganese 2.00 max. 2.00 max.
Sulfur 0.030 max. 0.030 max.
Phosphorus 0.045 max. 0.045 max.
Silicon 0.75 max. 0.75 max.
Chromium 22.0 – 24.0 22.0 – 24.0
Nickel 12.0 – 15.0 12.0 – 15.0

Mechanical Properties: (ASTM A167, A240)

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation (2″ Gauge length)
309 30 min. 75 min. 40 min.
309S 30 min. 75 min. 40 min.

Physical Properties:

Density (lb./ in^2) @ RT 0.29
Modulus of Elasticity in Tension (psi x 10^6) 29.0
Specific Heat (BTU/o F/lb.) 32 to 212 oF 0.12
Thermal Conductivity (BTU/hr/ft^2/ft) 212oF 9.0
932oF 10.8
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) 32 to 212oF 8.3
32 to 600oF 9.3
32 to 1,000oF 9.6
32 to 1,200oF 10.0
Electrical Resistivity (micro ohms – cm) at 70oF 39.8
Melting Point Range (oF) 2550 – 2650
Oxidation Resistance – Continuous Service(oF) 2000
Oxidation Resistance – Intermittent Service(oF) 1800

Processing:

These alloys are not hardenable by heat treatment. Anneal at 1900 – 2050°F (1038 – 1121°C), then water quench or rapidly air cool.

Forming:

Types 309 and 309S Stainless Steels can be roll formed, stamped and drawn readily. In-process annealing is usually required to reduce hardness and increase ductility.

Welding:

Type 309 is generally considered to have weldability nearly equivalent to the most common alloys of this class, Types 304 and 304L. When a weld filler is needed, AWS E/ER 309 and 310 are most often specified.

Corrosion:

Types 309 and 309S provide excellent general corrosion resistance. They are more resistant to marine atmospheres than Type 304. They exhibit high resistance to sulfite liquors and are useful for handling nitric acid, nitric-sulfuric acid mixtures, and acetic, citric, and lactic acids.