316Ti Stainless Steel Strips

316Ti Stainless steel strip manufacturer

SUS316Ti stainless steel is austenitic stainless steel, SUS316Ti stainless steel is added to SUS316 steel to improve the intergranular corrosion resistance. Sus316Ti stainless steel has strong intergranular corrosion resistance. It is widely used in petrochemical industry, mechanical and electrical hardware, shipbuilding and power plant.

316Ti Stainless steel strip Price in China ,Manufacturer of 316Ti Stainless Steel strip

316Ti stainless steel strip national standard 0Cr18Ni12Mo2Ti Chinese brand is 1Cr18Ni12Mo2Ti stainless steel strip, 316Ti stainless steel strip is added in SUS316 steel Ti to improve the intergranular corrosion resistance. Used to resist sulfuric acid, phosphoric acid, acetic acid, acetic acid equipment. These attributes refer to products in similar, but not identical, attributes that are specified for other products, such as strips and forgings in their respective specifications. Lower minimum pre and post thermal temperatures reduce the incidence of welds, cracking and simplify welding. Low hardness decreases in the heat affected zone to minimize deterioration in the mold performance.

Equivalent Material of 316Ti Stainless Steel  strip

Grade	Euronorm		China GB	Japanese JIS
	No.
316Ti	1.4571		1Cr18Ni12Mo2Ti	SUS316Ti

Standard Specification Of 316Ti strip

Thickness	0.1mm-12mm
Width	1mm-650mm
Length	Since the custom
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish	Hot rolled strip (HR), Cold rolled strip (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	strips, Foils, Rolls, Plain strip, Shim strip, Perforated strip, Chequered strip, Strip, Flats, Blank (Circle), Ring (Flange) etc.

316Ti stainless steel composition content.

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	Ti
316Ti	Min. Max.	≤0.08	≤2.00	≤1.00	≤0.035	0.03	16.00~19.00	1.80~2.50	11.00~14.00	0.2~0.70

YS (MPa) ≥205 TS (MPa) ≥520 EL (%) ≥40 Hv around 200 ° Thickness: cold 2B board (0.09-6.0mm); Hot rolled industrial strip No.1(3-50mm) medium thick strip, chemical strip, high temperature strip; Width: 5mm-- 850mm steel belt; 1000, 1219, 1250, 1500, 1800, 2000mm strip, flat strip Surface: 2B smooth surface, No.1 industrial surface, BA (6K) mirror, 8K mirror, 9K mirror, drawing surface, frosted surface.

Common Types Of 316Ti Stainless steel strip

• 316Ti Stainless steel strip
• 316Ti Stainless steel strip
• 316Ti Stainless steel strip

316Ti Characteristic machining technology

1D -- The surface has discontinuous granular shape, also known as fog surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling. 2D - A slightly silvery white colour. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling. 2B -- Silver white with better gloss and flatness than a 2D surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling. Ba - Excellent surface gloss, high reflectivity, like a mirror surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling. No.3 -- Good gloss, coarse grain surface. Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002). No.4 -- Good gloss, fine lines on the surface. Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002). HL -- Silver grey with hair streaks. Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain. MIRRO -- Specular. Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.