321 Stainless Steel Wire and Coil

ASTM A164 Stainless Steel 321 Wire, werkstoff nr. 1.4541 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 321
UNS	S32100
WERKSTOFF NR. / DIN	1.4541

 

STAINLESS STEEL 321 WIRE SPECIFICATION :

Standard : 321 / 1.4541 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)

UNS S32100 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Ti
321	0.08 max	2 max	0.75 max	0.045 max	0.03 max	17 – 19	3 – 4	9 – 12	0.10 max	5xC min 0.60% max

STEEL 321 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

TYPES OF STAINLESS STEEL 321 WIRE :

 

321 Stainless Steel Wire

321 stainless steel wire has very good stability. Under the condition of temperature of 427-816 °C and chromium carbide precipitation, it can maintain good resistance to intergranular corrosion. Due to the addition of titanium to the composition, the 321 alloy can still maintain stability in the case of chromium carbide formation.

Chemical Composition

Mechanical Property

Tolerance