3mm SS 409 / 409L Plate, Sheet & Coil Supplier, Stockist & Exporter

Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Specifications :

Specifications : ASTM A240 / ASME SA240 Dimensions : ASTM, ASME, and API Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Thickness : 4mm-100mm Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Chemical Composition of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates :

Grades C Ni Si S Mn P Cr Ti
SS 409 0.08 0.5 1.00 0.045 1.00 0.045 11.75 -10.5< 0.75-6x C
SS 409L 0.03 0.5 1.00 0.02 1.00 0.04 11.75-10.5 0.75-6(C+N)
SS 409M 0.03 1.00 0.5-1.5 10.80-12.50 1.5 max 0.040 0.030 0.03
SS 410 0.15 max 0.50 max 1.00 0.030 1.00 0.040 11.5 – 13.5 –
SS 430 0.12 1.00 0.030 1.00 0.040 16.0 18.0 –
SS 430F 0.12 1.00 0.15 1.25 0.06 16.0 18.0 –
SS 439 0.01 0.200 0.35 0.0015 0.25 0.02 17.35 0.335
SS 440 0.95 1.20 – 1.00 0.030 1.00 0.040 16.00 18.00 –

Mechanical properties for Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets :

Grades Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Hardness (Brinell) MAX Hardness (Rockwell B) MAX
SS 409 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 409L 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 409M 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 410 65 (450) 30 (205) 20 217 96
430 450 205 22 89 183
430F 552 typical 379 typical 25 typical – 262
SS 439 72.9 438 MPa63500 psi 263 MPa38100 psi 72.9
SS 440 95,000 psi 50,000 psi 25 % 175

SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Equivalent Grades :

Grade WERKSTOFF NR. UNS AFNOR BS JIS
SS 409 1.4512 S40900 Z3CT12 409 S 19 SUS 409
SS 409L 1.4512 S40903 – – SUS 409L
SS 409M – S40920 – HYFAB 3/12 SUS 409M
SS 410 1.4006 S41000 – 410S21 SUS 410
SS 430 1.4016 S43000 BF Z 3 CN 19-09 –
SS 431 1.4057 S43100 – BS970 431S29 / 431S29T SUS 431
SS 439 1.4510 S43035 – – –
SS 440 1.4125 S44000 – – –
 

Types Of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets:

SS 439 HR Sheets ASTM A240 Grade 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Tread Plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Floor Plate Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Diamond Sheet
SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 CR Plate SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 HR Plate
BS EN 10088-2 Diamond Stainless Steel 439 Plate 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Polished Stainless Steel Sheet
Cold rolled Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Hot Rolled plate
2B finish 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel sheet 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cut to size plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Coils Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Chequered Plate
2B BA Hairline Mirror finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet Brush Stainless Steel 439 Plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Galvanized Sheets 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Checker Plate
ASTM A240 Type 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Stainless Steel Sheet 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel 2B Plate
AISI 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plate 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cold Rolled Coils
8K Mirror Finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet Stainless Steel 439 Hairline Sheet
Bright Annealed WERKSTOFF NR. 1.4845 Sheet Stainless Steel Sheet ASTM A240 TP310
No.4 Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet SS UNS S40900 Diamond Plate
409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Durbar Plate Stainless Steel 439 Rolls Sheets
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Design Sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Expanded Sheet
Stainless Steel 439 Clad Plate Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Strip
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Shim Sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Quarto Plate
SS WERKSTOFF NR. 1.4841 Polished Plates Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Sheet
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Cold Rolled Plates Austenitic Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet
  Stainless Steel Sheet / Stainless Steel Plate Package   Stainless Steel Strip Package Shipment Package    

Related Products

  • Stainless Steel 202 Flanges
  • Stainless Steel 202 Rod/Bar
  • Stainless Steel 202 Square Bars
  • Stainless Steel 202 Welded Pipes
  • Stainless Steel 202 Plates
  • Stainless Steel 202 Welded Tubes
  • Stainless Steel 202 Flat Bars
  • Stainless steel 202 Angles
  • Stainless steel 202 fittings
  • Stainless Steel 202 Components
  • Stainless Steel UNS S30100 Plates, ASTM A240 301 SS Sheets Suppliers
  • Stainless Steel 301 Components
  • Stainless Steel 303 Flanges
  • Stainless Steel 303 Rod/Bars
  • Stainless steel 303 Square Bar
  • Stainless steel 303 channels
  • Stainless steel 303 H Beam
  • Stainless steel 303 I Beam
  • Stainless steel 303 fittings
  • Stainless Steel 303 Hex Bars
  • Stainless Steel 303 Components
  • Stainless Steel 304 Flanges
  • Stainless Steel 304 Rod/Bar
  • Stainless Steel 304 Hex Bar
  • Stainless Steel 304 Square Bar
  • Stainless Steel 304 Seamless Pipes
  • Stainless Steel 304 Welded Pipes
  • Stainless Steel 304 Plates/Sheet
  • Stainless Steel 304 Seamless Tubes
  • Stainless Steel 304 Flat Bar
  • Stainless Steel 304 Angle
  • Stainless Steel 304 Channel
  • Stainless Steel 304 H Beam
  • Stainless Steel 304 I Beam
  • Stainless steel 304 Welded Tubes
  • Stainless Steel 304 Single Slotted Pipe
  • Stainless Steel 304 Double Slotted Pipe
  • Stainless steel 304 fittings
  • Stainless Steel 304 Components
  • Stainless Steel 309 Rod/Bar
  • Stainless Steel 309 Hex Bar
  • Stainless Steel 309 Square Bar
  • Stainless Steel 309 Welded Pipes
  • Stainless Steel 309 Plates Sheet
  • Stainless steel 309 fittings
  • Stainless Steel 309 Components
  • Stainless Steel 310 Rod / Bar
  • Stainless steel 310 Hex Bars
  • Stainless Steel 310 Square Bar
  • Stainless Steel 310 Welded Pipes
  • Stainless Steel 310 Plates/Sheet
  • Stainless Steel 310 Seamless Pipes
  • Stainless steel 310 Welded Tubes
  • Stainless steel 310 fittings
  • Stainless steel 310 channels
  • Stainless steel 310 H Beam
  • Stainless steel 310 I Beam
  • Stainless steel 310 seamless tubes
  • Stainless Steel 310 Components
  • Stainless Steel 316 / 316Ti Flanges
  • Stainless Steel 316 / 316Ti Rod
  • Stainless Steel 316 / 316Ti Hex Bars
  • Stainless Steel 316 / 316Ti Square Bars
  • Stainless Steel 316 / 316Ti Seamless Pipes
  • Stainless Steel 316 / 316Ti Welded Pipes
  • Stainless Steel 316 / 316Ti Plates
  • Stainless Steel 316 / 316Ti Welded Tubes
  • Stainless Steel 316 / 316Ti Seamless Tubes
  • Stainless Steel 316 / 316Ti Flat Bars
  • Stainless Steel 316 / 316Ti Angles
  • Stainless Steel 316 / 316Ti Channels
  • Stainless Steel 316 / 316Ti H Beams
  • Stainless Steel 316 / 316Ti I Beam
  • Stainless Steel 316 / 316Ti Pipe Fittings
  • Stainless Steel 316 Single Slotted Pipe
  • Stainless Steel 316 Double Slotted Pipe
  • Stainless Steel 316/316Ti Components
  • Stainless Steel 317L Flanges
  • Stainless Steel 317L Rod/Bar
  • Stainless Steel 317L Hex Bar
  • Stainless steel 317L Square Bar
  • Stainless Steel 317L Plates/Sheet
  • Stainless steel 317L channels
  • Stainless steel 317L H Beam
  • Stainless steel 317L I Beam
  • Stainless steel 317L fittings
  • Stainless Steel 317L Components
  • Stainless Steel 321 / 347 Flanges
  • Stainless Steel 321/347 Rod/Bar
  • Stainless Steel 321/347 Hex Bar
  • Stainless Steel 321/347 Square Bar
  • Stainless Steel 321/347 Seamless Pipes
  • Stainless Steel 321/347 Welded Pipes
  • Stainless Steel 321 / 347 Pipe Fittings
  • Stainless Steel 321/347 Plates/Sheet
  • Stainless steel 321 / 347 Welded Tubes
  • Stainless steel 321 / 347 seamless tubes
  • Stainless steel 321 / 347 channels
  • Stainless steel 321 / 347 H Beam
  • Stainless steel 321 / 347 I Beam
  • Stainless Steel 321 / 347 Components
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Flange
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Rod/Bars
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Hex Bar
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Square Bar
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Welded Pipes
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet /Plates/Coil
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Welded tubes
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Channel
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 H Beam
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 I Beam
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Components
  • Stainless Steel 420/ 420B & 420C Rod/Bar
  • Stainless steel 420 / 420B & 420C hex bars
  • Stainless Steel 420/ 420B & 420C Square Bar
  • Stainless Steel 420/ 420B & 420C Plates/Sheet
  • Stainless Steel 420/420B/420C Components
  • Stainless Steel 416 / 440C / 446 Rod / Bar
  • Stainless Steel 416 / 440C / 446 Hex Bar
  • Stainless Steel 416 / 440C / 446 Square Bar
  • Stainless Steel 416 / 440C / 446 Sheet / Plates / Coil
  • Stainless Steel 416/440C/446 Components
  • Stainless Steel 904L Rod & Bar
  • Stainless Steel 904L Hex Bar
  • Stainless Steel 904L Square Bar
  • Stainless Steel 904L Welded Pipes
  • Stainless Steel 904L Plates & Sheets
  • Stainless Steel 904L Components
  • Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD plates
  • Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD Flat bars
  • Stainless steel 15-5PH / 17-4 PH / 17-7PH Rod / Bars
  • Stainless Steel 17-4 PH Hex Bar
  • Stainless Steel 17-4 PH Square Bar
  • Stainless Steel 17-4 PH Plates/Sheet
  • Stainless steel 15-5PH / 17-4 PH / 17-7PH Flanges
  • Stainless Steel 329 Square Bars
  • Stainless Steel 329 Hex Bars
  • Stainless Steel 329 Rod / Bars

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

    • 3mm SS 409 / 409L Plate, Sheet & Coil Supplier, Stockist & Exporter Related Video:

    Related Products

    Stainless Steel 304 Round Bar | ASTM ...
    Duplex 2205 Plate and ASTM A240 Type ...
    201 Grade 1.0-6.0mm Stainless Steel C...
    Gh2132 Gh3030 Gh3128 Pipe Tube Supplier
    2000 mm x 1000 mm x 2 mm 304 2B Stain...
    2000 mm x 1000 mm x 1.5 mm 304 2B Sta...