409 Stainless Steel Sheet and A240 TP409 Plate/ Coil supplier

Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Specifications :

Specifications : ASTM A240 / ASME SA240 Dimensions : ASTM, ASME, and API Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Thickness : 4mm-100mm Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Chemical Composition of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates :

Grades C Ni Si S Mn P Cr Ti
SS 409 0.08 0.5 1.00 0.045 1.00 0.045 11.75 -10.5< 0.75-6x C
SS 409L 0.03 0.5 1.00 0.02 1.00 0.04 11.75-10.5 0.75-6(C+N)
SS 409M 0.03 1.00 0.5-1.5 10.80-12.50 1.5 max 0.040 0.030 0.03
SS 410 0.15 max 0.50 max 1.00 0.030 1.00 0.040 11.5 – 13.5
SS 430 0.12 1.00 0.030 1.00 0.040 16.0 18.0
SS 430F 0.12 1.00 0.15 1.25 0.06 16.0 18.0
SS 439 0.01 0.200 0.35 0.0015 0.25 0.02 17.35 0.335
SS 440 0.95 1.20 1.00 0.030 1.00 0.040 16.00 18.00

Mechanical properties for Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets :

Grades Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Hardness (Brinell) MAX Hardness (Rockwell B) MAX
SS 409 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 409L 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 409M 8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 410 65 (450) 30 (205) 20 217 96
430 450 205 22 89 183
430F 552 typical 379 typical 25 typical 262
SS 439 72.9 438 MPa63500 psi 263 MPa38100 psi 72.9
SS 440 95,000 psi 50,000 psi 25 % 175

SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Equivalent Grades :

Grade WERKSTOFF NR. UNS AFNOR BS JIS
SS 409 1.4512 S40900 Z3CT12 409 S 19 SUS 409
SS 409L 1.4512 S40903 SUS 409L
SS 409M S40920 HYFAB 3/12 SUS 409M
SS 410 1.4006 S41000 410S21 SUS 410
SS 430 1.4016 S43000 BF Z 3 CN 19-09
SS 431 1.4057 S43100 BS970 431S29 / 431S29T SUS 431
SS 439 1.4510 S43035
SS 440 1.4125 S44000
 

Types Of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets:

SS 439 HR Sheets ASTM A240 Grade 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Tread Plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Floor Plate Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Diamond Sheet
SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 CR Plate SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 HR Plate
BS EN 10088-2 Diamond Stainless Steel 439 Plate 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Polished Stainless Steel Sheet
Cold rolled Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Hot Rolled plate
2B finish 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel sheet 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cut to size plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Coils Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Chequered Plate
2B BA Hairline Mirror finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet Brush Stainless Steel 439 Plate
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Galvanized Sheets 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Checker Plate
ASTM A240 Type 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Stainless Steel Sheet 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel 2B Plate
AISI 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plate 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cold Rolled Coils
8K Mirror Finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet Stainless Steel 439 Hairline Sheet
Bright Annealed WERKSTOFF NR. 1.4845 Sheet Stainless Steel Sheet ASTM A240 TP310
No.4 Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet SS UNS S40900 Diamond Plate
409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Durbar Plate Stainless Steel 439 Rolls Sheets
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Design Sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Expanded Sheet
Stainless Steel 439 Clad Plate Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Strip
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Shim Sheet Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Quarto Plate
SS WERKSTOFF NR. 1.4841 Polished Plates Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Sheet
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Cold Rolled Plates Austenitic Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet
  Stainless Steel Sheet / Stainless Steel Plate Package   Stainless Steel Strip Package Shipment Package    

Related Products

  • Stainless Steel 202 Flanges
  • Stainless Steel 202 Rod/Bar
  • Stainless Steel 202 Square Bars
  • Stainless Steel 202 Welded Pipes
  • Stainless Steel 202 Plates
  • Stainless Steel 202 Welded Tubes
  • Stainless Steel 202 Flat Bars
  • Stainless steel 202 Angles
  • Stainless steel 202 fittings
  • Stainless Steel 202 Components
  • Stainless Steel UNS S30100 Plates, ASTM A240 301 SS Sheets Suppliers
  • Stainless Steel 301 Components
  • Stainless Steel 303 Flanges
  • Stainless Steel 303 Rod/Bars
  • Stainless steel 303 Square Bar
  • Stainless steel 303 channels
  • Stainless steel 303 H Beam
  • Stainless steel 303 I Beam
  • Stainless steel 303 fittings
  • Stainless Steel 303 Hex Bars
  • Stainless Steel 303 Components
  • Stainless Steel 304 Flanges
  • Stainless Steel 304 Rod/Bar
  • Stainless Steel 304 Hex Bar
  • Stainless Steel 304 Square Bar
  • Stainless Steel 304 Seamless Pipes
  • Stainless Steel 304 Welded Pipes
  • Stainless Steel 304 Plates/Sheet
  • Stainless Steel 304 Seamless Tubes
  • Stainless Steel 304 Flat Bar
  • Stainless Steel 304 Angle
  • Stainless Steel 304 Channel
  • Stainless Steel 304 H Beam
  • Stainless Steel 304 I Beam
  • Stainless steel 304 Welded Tubes
  • Stainless Steel 304 Single Slotted Pipe
  • Stainless Steel 304 Double Slotted Pipe
  • Stainless steel 304 fittings
  • Stainless Steel 304 Components
  • Stainless Steel 309 Rod/Bar
  • Stainless Steel 309 Hex Bar
  • Stainless Steel 309 Square Bar
  • Stainless Steel 309 Welded Pipes
  • Stainless Steel 309 Plates Sheet
  • Stainless steel 309 fittings
  • Stainless Steel 309 Components
  • Stainless Steel 310 Rod / Bar
  • Stainless steel 310 Hex Bars
  • Stainless Steel 310 Square Bar
  • Stainless Steel 310 Welded Pipes
  • Stainless Steel 310 Plates/Sheet
  • Stainless Steel 310 Seamless Pipes
  • Stainless steel 310 Welded Tubes
  • Stainless steel 310 fittings
  • Stainless steel 310 channels
  • Stainless steel 310 H Beam
  • Stainless steel 310 I Beam
  • Stainless steel 310 seamless tubes
  • Stainless Steel 310 Components
  • Stainless Steel 316 / 316Ti Flanges
  • Stainless Steel 316 / 316Ti Rod
  • Stainless Steel 316 / 316Ti Hex Bars
  • Stainless Steel 316 / 316Ti Square Bars
  • Stainless Steel 316 / 316Ti Seamless Pipes
  • Stainless Steel 316 / 316Ti Welded Pipes
  • Stainless Steel 316 / 316Ti Plates
  • Stainless Steel 316 / 316Ti Welded Tubes
  • Stainless Steel 316 / 316Ti Seamless Tubes
  • Stainless Steel 316 / 316Ti Flat Bars
  • Stainless Steel 316 / 316Ti Angles
  • Stainless Steel 316 / 316Ti Channels
  • Stainless Steel 316 / 316Ti H Beams
  • Stainless Steel 316 / 316Ti I Beam
  • Stainless Steel 316 / 316Ti Pipe Fittings
  • Stainless Steel 316 Single Slotted Pipe
  • Stainless Steel 316 Double Slotted Pipe
  • Stainless Steel 316/316Ti Components
  • Stainless Steel 317L Flanges
  • Stainless Steel 317L Rod/Bar
  • Stainless Steel 317L Hex Bar
  • Stainless steel 317L Square Bar
  • Stainless Steel 317L Plates/Sheet
  • Stainless steel 317L channels
  • Stainless steel 317L H Beam
  • Stainless steel 317L I Beam
  • Stainless steel 317L fittings
  • Stainless Steel 317L Components
  • Stainless Steel 321 / 347 Flanges
  • Stainless Steel 321/347 Rod/Bar
  • Stainless Steel 321/347 Hex Bar
  • Stainless Steel 321/347 Square Bar
  • Stainless Steel 321/347 Seamless Pipes
  • Stainless Steel 321/347 Welded Pipes
  • Stainless Steel 321 / 347 Pipe Fittings
  • Stainless Steel 321/347 Plates/Sheet
  • Stainless steel 321 / 347 Welded Tubes
  • Stainless steel 321 / 347 seamless tubes
  • Stainless steel 321 / 347 channels
  • Stainless steel 321 / 347 H Beam
  • Stainless steel 321 / 347 I Beam
  • Stainless Steel 321 / 347 Components
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Flange
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Rod/Bars
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Hex Bar
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Square Bar
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Welded Pipes
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet /Plates/Coil
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Welded tubes
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Channel
  • Stainless Steel 409/409M/409L/410/430/430F/431/439/441 H Beam
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 I Beam
  • Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Components
  • Stainless Steel 420/ 420B & 420C Rod/Bar
  • Stainless steel 420 / 420B & 420C hex bars
  • Stainless Steel 420/ 420B & 420C Square Bar
  • Stainless Steel 420/ 420B & 420C Plates/Sheet
  • Stainless Steel 420/420B/420C Components
  • Stainless Steel 416 / 440C / 446 Rod / Bar
  • Stainless Steel 416 / 440C / 446 Hex Bar
  • Stainless Steel 416 / 440C / 446 Square Bar
  • Stainless Steel 416 / 440C / 446 Sheet / Plates / Coil
  • Stainless Steel 416/440C/446 Components
  • Stainless Steel 904L Rod & Bar
  • Stainless Steel 904L Hex Bar
  • Stainless Steel 904L Square Bar
  • Stainless Steel 904L Welded Pipes
  • Stainless Steel 904L Plates & Sheets
  • Stainless Steel 904L Components
  • Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD plates
  • Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD Flat bars
  • Stainless steel 15-5PH / 17-4 PH / 17-7PH Rod / Bars
  • Stainless Steel 17-4 PH Hex Bar
  • Stainless Steel 17-4 PH Square Bar
  • Stainless Steel 17-4 PH Plates/Sheet
  • Stainless steel 15-5PH / 17-4 PH / 17-7PH Flanges
  • Stainless Steel 329 Square Bars
  • Stainless Steel 329 Hex Bars
  • Stainless Steel 329 Rod / Bars

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.


  • 409 Stainless Steel Sheet and A240 TP409 Plate/ Coil supplier Related Video: