5052/5083/5005/5A05 Good Corrosion Resistance and Weldability Aluminum Bar Aluminum Alloy Bar

5052/5083/5005/5A05 Good Corrosion Resistance and Weldability Aluminum Bar Aluminum Alloy Bar 5052 aluminum alloy is a kind of Al Mg alloy, which is widely used, especially in the construction industry. It is the most promising alloy. It has good corrosion resistance, weldability, cold workability and medium strength. The main alloy element of 5052 aluminum alloy is magnesium, which has good forming and processing performance, corrosion resistance, weldability and medium strength. It is used to manufacture aircraft oil tank, oil pipe, as well as sheet metal parts of traffic vehicles and ships, instruments, street lamp bracket and rivets, hardware products, electric appliance outer shell, etc. 5052 aluminum alloy is the most widely used antirust aluminum, which has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing. It is mainly used for low load parts that require high plasticity and good weldability and work in liquid or gas medium, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing: wire rod is used for rivets.   Chemical Composition Aluminum al: margin Silicon Si: ≤ 0.25 Copper Cu: ≤ 0.10 Mg: 2.2 ~ 2.8 Zinc Zn: ≤ 0.10 Manganese Mn: ≤ 0.10 Cr: 0.15-0.35 Iron Fe: ≤ 0.40 Note: single: < 0.05; total: < 0.15
Alloy Si Fe Cu Mn Mg Cr Zn Single Other
5052 ≤0.25 ≤0.4 ≤0.10 ≤0.10 2.2-2.8 0.15-0.30 ≤0.10 ≤0.05 ≤0.15
Aluminum Bar: Diameter φ8 - φ460. Length: 1~6 meters. Aluminum Tube: (diameter φ10 - φ460, wall thickness 0.3-40mm) Pure aluminum tube, alloy aluminum tube, seamless aluminum tube (extrusion, drawing), large diameter aluminum tube, thick wall aluminum tube, alumina tube, aluminum flat tube, aluminum square tube, elliptical tube, coil, fine pull Pull out the aluminum tube.   Technical Parameter
Alloy Type Tensile Strength (250ºC/MPa) 0.2% Yield Strength (MPa) Hardness (HB) Elongation rate (%)
5052-H112 175 195 60 12
5083-H112 180 211 65 14
6061-T651 290 240 95 12
6082-T651 315 280 94 12
7050-T651 510 455 135 10
7075-T651 572 503 150 11
2024-T351 470 325 120 20