430 Stainless Steel Sheet Bright Annealed (BA) Finish
Model No.430 BA FINISH Made in China The 430 bright annealed (BA) finish is cold rolled stainless steel that is annealed in a controlled atmosphere to retain a highly reflective finish. Although it is not completely identical to the #8 mirror finish, it appears to be very similar. The 430 stainless steel bright annealed finish has a PVC film on one side to help protect against scratching during fabrication and installation.
430 BA Finish Stainless steel sheet Size: T.: 0.3-3.0mm W.: 1000~2000mm BA Finish is protected by PVC film to avoid damage. 430 stainless steel sheet metal is a slightly lower grade than the 300 series and is commonly used for applications when the metal needs to hold a magnet, which the 300 series does not. 430 stainless steel sheet bright annealed finish is slightly more susceptible to corrosion since it does not contain nickel or molybdenum like the 300 series
CHEMICAL COMPOSITION:
430 STAINLESS STEEL
|
| |
% |
| C |
MAX. 0.120 |
| Cr |
16.00-18.00 |
| Mn |
MAX. 1.0 |
| Ni |
|
| P |
MAX. 0.040 |
| Si |
MAX. 0.75 |
| S |
MAX. 0.03 |
PHYSICAL TEST:
430 STAINLESS STEEL
|
| |
| 0.2 Y.S. |
MIN. 205 N/MM2 |
| T.S. |
MIN. 450 N/MM2 |
| EL |
22% |
| HV |
|
| HRB |
MAX. 89 |
| BENDING TEST |
180 DEGREE |
Size of stainless steel sheet 430
| Grade: |
430 |
| Other Grade: |
AISI 304L, AISI 430, AISI 316L, 202, 201, AISI 301, AISI 409L |
| Surface: |
2D, 2B, BA, NO.1, NO.3, NO.4, HL, HairLine, NO.8 (MIRROR), Ethching. |
| Thickness: |
Cold-Rolled 0.1mm~3.0mm Hot-Rolled 3.0mm~25mm |
| Width: |
1000MM, 1219MM, 1250MM, 1500MM, Max 1524mm (5ft) |
| Length: |
2000MM, 2438MM, 2500MM, 3000MM, Max 6000mm |