Accept all small/ Large Orders of ASTM A240 Type Super Duplex 2507 Plate, SA 240 GR 2507 Sheet, 2507 Coil suppliers, Super Duplex Steel S32760 Strip manufacturer

Accept all small/ Large Orders of ASTM A240 Type Super Duplex 2507 Plate, SA 240 GR 2507 Sheet, 2507 Coil suppliers, Super Duplex Steel S32760 Strip manufacturer

Stainless steel strip can be made by cold rolling, including the thickness of 0.31-3.0 mm sheet.  

2507 Stainless steel strip manufacturer

2507 is a ferrite - austenitic (duplex) stainless steel with excellent resistance to pitting, crevice and uniform corrosion.

2507 Stainless steel strip Price in China ,Manufacturer of 2507 Stainless Steel strip

2507 is a ferritic-austenitic (dual-phase) stainless steel that combines the most beneficial properties of many ferritic and austenitic steels. Due to its high chromium and molybdenum content, the steel has excellent resistance to pitting, crevices and uniform corrosion. Dual-phase microstructure ensures that the steel has high stress corrosion cracking resistance and high mechanical strength. 2507 stainless steel applications in the oil and gas industry; Offshore shitaitian oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, sprinkler system, water stabilization system; Petrochemical equipment; Desalination (desalination) equipment (and the high-pressure pipe and seawater pipe in the equipment); Mechanical and structural components requiring both high strength and high corrosion resistance; Burning (waste) gas purification equipment. Main ingredients: 25Cr-7Ni-4Mo-0.27N

Equivalent Material of 2507 Stainless Steel  strip

Grade Euronorm China GB Japanese JIS EURONORM
No.
2507 1.4410 00Cr22Ni5Mo3N SUS2507 1.4410 - X2 Cr Ni MoN 25.7.4

Standard Specification Of 2507 strip

Thickness 0.1mm-12mm
Width 1mm-650mm
Length Since the custom
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish Hot rolled strip (HR), Cold rolled strip (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form  strips, Foils, Rolls, Plain strip, Shim strip, Perforated strip, Chequered strip, Strip, Flats, Blank (Circle), Ring (Flange) etc.

2507 stainless steel composition content.

Grade C Mn Si P S Cr Mo Ni N
2507 Min. Max. ≤0.03 ≤1.2 ≤0.80 ≤0.035 ≤0.02 24-26 3-5 6-8 0.24-0.32
SAF 2507 offers high compressive strength, impact strength, low coefficient of thermal expansion and high thermal conductivity. These characteristics are applicable to many structural and mechanical components. SAF 2507 has high impact strength and is not suitable for prolonged exposure to temperatures higher than 570°F, which may reduce toughness. Tensile strength: σb≥ 730MPa; Elongation: δ≥20%

Common Types Of 2507 Stainless steel strip

  • 2507 Stainless steel strip
  • 2507 Stainless steel strip
  • 2507 Stainless steel strip

2507 Characteristic machining technology

1D -- The surface has discontinuous granular shape, also known as fog surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling. 2D - A slightly silvery white colour. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling. 2B -- Silver white with better gloss and flatness than a 2D surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling. Ba - Excellent surface gloss, high reflectivity, like a mirror surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling. No.3 -- Good gloss, coarse grain surface. Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002). No.4 -- Good gloss, fine lines on the surface. Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002). HL -- Silver grey with hair streaks. Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain. MIRRO -- Specular. Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.

Product Specification

Finish Thickness Characteristics Applications
No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

Chemical composition

Grade

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

N

Cu

Nb

201

≤0.15

≤1.0

5.50-7.50

≤0.05

≤0.03

16.00-18.00

3.50-5.50

-

-

0.05-0.25

-

-

202

≤0.15

≤1.0

7.50-10.00

≤0.05

≤0.03

17.00-19.00

4.00-6.00

-

-

0.05-0.25

-

-

301

≤0.15

≤1.0

≤2.0

≤0.045

≤0.03

16.00-18.00

6.00-8.00

-

-

≤0.1

-

-

302

≤0.15

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

≤0.1

-

-

303

≤0.15

≤1.0

≤2.0

≤0.2

≥0.15

17.00-19.00

8.00-10.00

≤0.6

-

≤0.1

-

-

304

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

-

-

-

304L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304H

0.04-0.1

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304N

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

0.10-0.16

-

-

304J1

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

6.00-9.00

-

-

-

1.00-3.00

-

305

≤0.12

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

10.50-13.00

-

-

-

-

-

309S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

22.00-24.00

12.00-15.00

-

-

-

-

-

310S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

24.00-26.00

19.00-22.00

-

-

-

-

-

316

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

12.00-15.00

2.00-3.00

-

-

-

-

316H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316N

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

0.10-0.16

-

-

316Ti

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-19.00

11.00-14.00

2.00-3.00

≥5C

-

-

-

317L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

11.00-15.00

3.00-4.00

-

-

-

-

321

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

5C-0.7

-

-

-

347

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

10C-1.10

347H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

8C-1.10

2205

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

21.00-24.00

4.50-6.50

2.50-3.50

-

0.08-0.20

-

-

2507

≤0.03

≤0.8

≤1.2

≤0.035

≤0.02

24.00-26.00

6.00-8.00

3.00-5.00

-

0.24-0.32

-

-

904L

≤0.02

≤1.0

≤2.0

≤0.045

≤0.03

19.00-23.00

23.00-28.00

4.00-5.00

-

-

1.00-2.00

-

C276

≤0.02

≤0.05

≤1.0

-

-

14.00-16.50

Other

-

-

-

-

-

Monel400

≤0.3

≤0.5

≤2.0

-

≤0.024

-

≥63

-

-

-

28-34

-

409L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

17.00-19.00

-

-

-

-

-

-

410

≤0.15

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

410L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

420J1

0.16-0.25

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

420J2

0.26-0.40

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

430

≤0.12

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

436L

≤0.025

≤1.0

≤1.0

≤0.035

≤0.03

16.00-19.00

-

-

-

-

-

-

439

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

440A

0.60-0.75

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440B

0.75-0.95

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440C

0.95-1.2

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

441

≤0.03

0.2-0.8

≤0.7

≤0.03

≤0.015

17.50-18.50

-

≤0.5

0.1-0.5

≤0.025

-

0.3+3C-0.9
  • ASTM A240 Type 2507 Super Duplex Sheet，
  • UNS S32760 Super Duplex 2507 Foil，
  • Saf 2507 Plate，
  • ASTM A240 Type 2507 Super Duplex Strip，
  • SA 240 GR 2507 Coil，
  • Saf 2507 Shim Sheet，
  • SA 240 GR 2507 Strip Tape，
  • SA 240 GR 2507 Shim Stock，
  • S32760 Super Duplex 2507 Chequered Plate，
  • 2507 Super Duplex Perforated Sheet，
  • Super Duplex Steel S32750 Clad Plate，
  • 1.4410 Super Duplex 2507 Hot Rolled Plate，
  • Super Duplex 2507 Superalloy Mesh Plate，
  • Super Duplex Din 1.4410 Cold Rolled Sheet，
  • Duplex 2507 Stainless Steel Cold Rolled Plate，
  • 2507 super duplex Checker Plate，
Types of Super Duplex 2507 Plate
UNS S32760 Super Duplex 2507 Chequered Plate
Super Duplex Steel S32750 Nickel Clad Plate
SA 240 GR 2507 Shim Stock
Super Duplex 2507 Superalloy Mesh Plate
Saf 2507 Plate
ASTM A240 Type 2507 Super Duplex Sheet
UNS S32760 Super Duplex 2507 Foil
SA 240 GR 2507 Coil
1.4410 Super Duplex 2507 Hot Rolled Plate
Super Duplex 2507 Din 1.4410 Cold Rolled Sheet
2507 super duplex Checker Plate
Duplex 2507 Stainless Steel Cold Rolled Plate
Super Duplex 2507 Rolling Plate
SA 240 GR 2507 Polished Plate
Saf 2507 Quarto Plate
ASTM A240 Type 2507 Super Duplex Flat Sheet
ASTM A240 Type 2507 Super Duplex Precision Strip
SA 240 GR 2507 Strip Tape
Saf 2507 Shim Sheet
ASTM A240 Type 2507 Super Duplex Perforated Sheet
    • Accept all small/ Large Orders of ASTM A240 Type Super Duplex 2507 Plate, SA 240 GR 2507 Sheet, 2507 Coil suppliers, Super Duplex Steel S32760 Strip manufacturer Related Video:

    Related Products

    1.4162 (LDX 2101), S32101
    S32750/2507 Duplex Steel Stainless St...
    2205 stainless steel tee
    Duplex Alloy 2205 UNS S31803 UNS S32205
    China 2205 Round Bar
    Duplex 2205 Sheet Plate · ASTM A240 U...