Chinese Professional Grinding Stainless Steel Sheet - 304 Stainless Steel Wire (SS 304 Wire) – Cepheus

Product Detail

304 Stainless Steel Wire

304 is the most widely used stainless steel and is almost well known to all over the world. 304 stainless steel wire has good corrosion resistance, heat resistance and mechanical properties in the atmosphere, and is widely used in industry, decoration industry, food and medical industry. Hightop stainless steel wire diameter range is 0.002-0.125″ (0.05-3.2 mm), accord with ASTM A580 and ASTM A478, mainly used for woven mesh, binding wire and other purposes.

Chemical Composition

	Chemical Composition, %
Type	C, ≤	Si, ≤	Mn, ≤	P, ≤	S, ≤	Cr	Ni	N, ≤
304	0.08	1.00	2.00	0.045	0.03	18.00-20.00	8.00-10.50	0.10

Annealed SS 304 Wire

Hightop 304 annealed stainless steel wire is mainly used for stainless steel fine mesh and wire binding, tensile strength is up to 700 MPa (100,000 psi).

Cold Drawn SS 304 Wire

Hightop 304 cold drawn stainless steel wire is mainly used for coarse mesh, welded wire mesh, tensile strength is 830-1030 MPa (120,000 – 150,000 psi). For spring applications, the tensile strength is shown as follows:

Tensile Strength
in.	mm	ksi	MPa
d≤0.009	d≤0.23	325-355	2240-2450
0.009<d≤0.010	0.23<d≤0.25	320-350	2205-2415
0.010<d≤0.011	0.25<d≤0.28	318-348	2190-2400
0.011<d≤0.012	0.28<d≤0.30	316-346	2180-2385
0.012<d≤0.013	0.30<d≤0.33	314-344	2165-2370
0.013<d≤0.014	0.33<d≤0.36	312-342	2150-2360
0.014<d≤0.015	0.36<d≤0.38	310-340	2135-2345
0.015<d≤0.016	0.38<d≤0.41	308-338	2125-2330
0.016<d≤0.017	0.41<d≤0.43	306-336	2110-2315
0.017<d≤0.018	0.43<d≤0.46	304-334	2095-2300
0.018<d≤0.020	0.46<d≤0.51	300-330	2070-2275
0.020<d≤0.022	0.51<d≤0.56	296-326	2040-2250
0.022<d≤0.024	0.56<d≤0.61	292-322	2015-2220
0.024<d≤0.026	0.61<d≤0.66	291-320	2005-2205
0.026<d≤0.028	0.66<d≤0.71	289-318	1995-2190
0.028<d≤0.031	0.71<d≤0.79	285-315	1965-2170
0.031<d≤0.034	0.79<d≤0.86	282-310	1945-2135
0.034<d≤0.037	0.86<d≤0.94	280-308	1930-2125
0.037<d≤0.041	0.94<d≤1.04	275-304	1895-2095
0.041<d≤0.045	1.04<d≤1.14	272-300	1875-2070
0.045<d≤0.050	1.14<d≤1.27	267-295	1840-2035
0.050<d≤0.054	1.27<d≤1.37	265-293	1825-2020
0.054<d≤0.058	1.37<d≤1.47	261-289	1800-1990
0.058<d≤0.063	1.47<d≤1.60	258-285	1780-1965
0.063<d≤0.070	1.60<d≤1.78	252-281	1735-1935
0.070<d≤0.075	1.78<d≤1.90	250-278	1725-1915
0.075<d≤0.080	1.90<d≤2.03	246-275	1695-1895
0.080<d≤0.087	2.03<d≤2.21	242-271	1670-1870
0.087<d≤0.095	2.21<d≤2.41	238-268	1640-1850
0.095<d≤0.105	2.41<d≤2.67	232-262	1600-1805
0.105<d≤0.115	2.67<d≤2.92	227-257	1565-1770
0.115<d≤0.125	2.92<d≤3.17	222-253	1530-1745
0.125<d≤0.135	3.17<d≤3.43	217-248	1495-1710
0.135<d≤0.148	3.43<d≤3.76	210-241	1450-1660
0.148<d≤0.162	3.76<d≤4.11	205-235	1415-1620

Tolerance

Diameter (mm)	Tolerance (mm)
0.020-0.049	+0.002, -0.001
0.050-0.074	±0.002
0.075-0.089	±0.002
0.090-0.109	+0.003, -0.002
0.110-0.169	±0.003
0.170-0.184	±0.004
0.185-0.199	±0.004
0.200-0.299	±0.005
0.300-0.310	±0.006
0.320-0.499	±0.006
0.500-0.599	±0.006
0.600-0.799	±0.008
0.800-0.999	±0.008
1.00-1.20	±0.009
1.20-1.40	±0.009
1.40-1.60	±0.010
1.60-1.80	±0.010
1.80-2.00	±0.010
2.00-2.50	±0.012
2.50-3.00	±0.015
3.00-4.00	±0.020
4.00-5.00	±0.020