Incoloy Wire
Incoloy is a trademark of a series of nickel-based alloys with excellent corrosion resistance and high temperature strength, including Incoloy 825 (UNS N08825), Incoloy 800 (UNS N08800), Incoloy 800h (UNS N08810), Incoloy 909 (UNS N19909), Incoloy 901 (UNS N09901), Incoloy 840, etc. Hightop supplies Incoloy 825 and Incoloy 800 wire for use in woven mesh, filter cloth and filter cartridges.
Chemical Composition
|
|
Composition, % |
Incoloy |
Alloy |
C, ≤ |
Si, ≤ |
Mn, ≤ |
S, ≤ |
Cr |
Ni |
Mo |
Cu |
Fe, ≥ |
Al, ≤ |
Ti |
825 |
UNS N08825 |
0.05 |
0.50 |
1.00 |
0.03 |
19.5-23.5 |
38.0-46.0 |
2.5-3.5 |
1.5-3.0 |
22.0 |
0.2 |
0.6-1.2 |
800 |
UNS N08800 |
0.10 |
1.0 |
1.50 |
0.015 |
19.0-23.0 |
30.0-35.0 |
– |
≤ 0.75 |
39.5 |
0.15-0.60 |
0.15-0.60 |
Mechanical Properties
|
|
Tensile Strength |
Yield Strength, 0.2% |
Elongation in 2 in. (50.8 mm) |
|
Incoloy |
Alloy |
≥ ksi (MPa) |
≥ ksi (MPa) |
%, ≥ |
Forms and conditions |
825 |
UNS N08825 |
85 (586) |
35 (241) |
30 |
Rod and bar , annealed |
800 |
UNS N08800 |
80 (550) |
35 (240) |
25 |
Rod and bar, as hot worked |
75 (515) |
30 (205) |
30 |
Rod and bar, cold-worked and hot-worked, annealed |
Tolerance
Diameter (mm) |
Tolerance (mm) |
0.020-0.049 |
+0.002, -0.001 |
0.050-0.074 |
±0.002 |
0.075-0.089 |
±0.002 |
0.090-0.109 |
+0.003, -0.002 |
0.110-0.169 |
±0.003 |
0.170-0.184 |
±0.004 |
0.185-0.199 |
±0.004 |
0.200-0.299 |
±0.005 |
0.300-0.310 |
±0.006 |
0.320-0.499 |
±0.006 |
0.500-0.599 |
±0.006 |
0.600-0.799 |
±0.008 |
0.800-0.999 |
±0.008 |
1.00-1.20 |
±0.009 |
1.20-1.40 |
±0.009 |
1.40-1.60 |
±0.010 |
1.60-1.80 |
±0.010 |
1.80-2.00 |
±0.010 |
2.00-2.50 |
±0.012 |
2.50-3.00 |
±0.015 |
3.00-4.00 |
±0.020 |
4.00-5.00 |
±0.020 |