Inconel 718 bar

Inconel 718 round bar suppliers, Inconel 718 Flat Bar, Inconel 718 Hex Bar Suppliers in China, Inconel 718 Rod, Alloy 718 Hollow Bar Stockist in China, Inconel Alloy 718 Round Rod distributor, Inconel 718 Round Bar manufacturer in China.   Inconel Alloy 718 Round Bar is austenitic nickel-based superalloy. Inconel 718 bar is designated as UNS N07718 and Werkstoff Number 2.4668. Inconel 718 Bright Bar is also known as Nicrofer 5219 Round Bar, Superimphy 718 Round Bar, Haynes 718 Round Bar, Pyromet 718 Round Bar, Supermet 718 Round Bar. and Udimet 718 Round Bar. Inconel 718 Round Bar Chemistry is Nickel 52%, Chromium 19%, Iron, 18%, Columbium 5%, Molybdenum 3%, Titanium 1%. These Alloy 718 Round Bar, Inconel 718 Bar, Inconel 718 Hollow Bar and Inconel 718 Shaft are mainly used in Gas turbine engines ducts, cryogenic tanks, springs and fasteners and motor components. For most applications, Alloy 718 Round Bar / Inconel 718 Forged Bar is specified as: solution annealed and precipitation hardened.Sasa alloy’s Inconel Alloy 718 Bar / Inconel 718 Round Bars is hardened by the precipitation of secondary phases.

Inconel 718 bar properties

Typical Mechanical Properties

There are two main types of solution annealed and aging treatments: 1) Solution Treatment (AMS 5662 Bar / AMS 5596 Sheet): 1725°F – 1850°F + Air Cool. Heat Treatment (AMS 5663 Bar) : 1325°F for 8 hrs, cooling 100°F/hr to 1150°F, hold at 1150°F for 8hrs min, + Air Cool . This treatment gives the highest room temperature tensile and yield strengths as well as producing the highest fatigue strength. It is the optimum heat treatment for Alloy 718 where a combination of rupture life, notch rupture life and rupture ductility is required. 2) Alternative Solution Treatment (AMS 5664 Bar / AMS 5597 Sheet): 1900°F – 1950°F + Air Cool Heat Treatment: 1400°F for 10hrs, furnace cool to 1200°F, hold at 1200°F for a total aging time of 20 hrs + Air Cool. This is the prefered treatment in tensile-limited applications as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength. However, this treatment has a tendency to produce notch brittleness in stress rupture.  

Inconel Alloy 718 Round, Bright, Hex, Threaded Bar Chemical Composition

718 Inconel Alloy Round Bars Mechanical Properties

Mechanical Properties in Solution Annealed and Aged Condition for Aerospace bar

Mechanical Properties in Solution Annealed and Aged Condition for Oil patch bar

ASTM B637 Inconel 718 Bars Equivalent Grades