Brass Material Hex Tube C35200 C3605 Hollow Solid Bar

Copper Nickel 70/30 Round Bars & Copper Nickel 70/30 Wires

Copper Nickel 70/30 Round Bars Manufacturer, Copper Nickel 70/30 Wires, ASTM B151 Cu-Ni 70/30 Round Bars, Cu-Ni 70/30 Wires, 70/30 Copper Nickel Rods, Cu-Ni 70/30 Flat Bar Suppliers & Exporters.

ASTM B151/ B152 UNS C71500 70/30 Hex Bars, Cupro Nickel 70/30 Square Bars, Cupro Nickel 70/30 Forged Bars, 70/30 Cu-Ni WERKSTOFF NR. 2.0872 Round Bars, ASTM B151 Cu-Ni Threaded Bar Dealer & Exporter.

leading manufacturers, suppliers, exporters, and stockists for high-quality Copper Nickel 70/30 Round Bars and Copper Nickel 70/30 Wires. Cu-Ni 70/30 Hollow Bars are also being offered in different sizes and shapes to our customers. Copper Nickel 70/30 Threaded Bars (UNS C71500) are an alloy of nickel, copper and firming components such as manganese and iron. UNS C71500 Cu-Ni 70/30 round bars and wires are widely used in various application industries like Cement Industry, Power Industry, Petrochemicals Plants, Oil Refineries, Fertilizers Plants, Sugar Mills, Chemical Plants, Pharmaceuticals, etc. Kalpataru Piping Solutions offer a wide range of quality Copper Nickel 70/30 Round Bars & Wires like Bright Bar, Hex Bar, Square Bar, Rectangular Bar, Flat Bar, Polished Bar, Threaded Bar.

Equivalent Grades of Copper Nickel 70/30 Round Bars & Wires

STANDARD	WERKSTOFF NR.	UNS
Copper Nickel 70/30	2.0882	C71500

Specifications of Cupro Nickel 70/30 Round Bars & Cupro Nickel 70/30 Wires

Range	:	5 mm To 500 mm thick in 100 mm TO 6000 mm
Wier Range	:	50 Swg. to 4 Swg.
Standards	:	ASTM B151, ASME SB151
Length	:	100 mm to 6000 mm Long
Finish	:	Bright, Polish & Black
Form	:	Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh
Grades	:	UNS C71500 (70:30)

Chemical Composition of Cu-Ni 70/30 Round Bars & Wires

Grade	Cu	Mn	Pb	Ni	Fe	Zn
Copper Nickel 70/30	65.0 min	1 max	.05 max	29-33	0.4-1.0	1 max

Mechanical & Physical Properties of Copper Nickel 70/30 Round Bars & Wires

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
0.323 lb/in3 at 68 F	2260 F	50000 psi	20000 psi	30 %

Types of Cupro Nickel 70/30 Round Bars & Cupro Nickel 70/30 Wires

•   Forged round bars and wires •   Slip-on Raised Face round bars and wires (SORF) •   Blind Raised Face round bars and wires (BLRF) •   Weld Neck Raised Face round bars and wires (WNRF) •   Socket Weld Raised Face round bars and wires (SWRF) •   Screwed/Threaded round bars and wires •   Orifice round bars and wires •   Spectacle Blind round bars and wires •   Reducing round bars and wires •   Ring Type Joint round bars and wires •   Tongue & Groove round bars and wires •   Plate round bars and wires •   Flat Face round bars and wires •   ANSI / ASME / ASA B16.5 round bars and wires •   EN 1092-1 round bars and wires •   DIN round bars and wires •   BS 10 round bars and wires •   BS 4504 round bars and wires •   JIS STD round bars and wires    

Standards	MIL-C-15726FASME SB-171ASTM B 171
UNS Designation Number	70-30 (UNS C71500)
Nominal Chemicals	70-30: Copper 69.5%, Nickel 30.0%, Iron 0.5%
Machinability	20
Average Tensile Mechanical Properties	40000 psi
Average Yield Mechanical Properties	15000 psi

Widely used in marine applications where resistance to both corrosion and biofouling is important. C715 Cupro-Nickel is a 70/30 copper-nickel alloy that is almost entirely resistant to stress corrosion and is ideal when used in applications involving high-velocity polluted seawater. Typical 715 CuNi applications for use in the chemical and desalination industries include tubes and tubesheets for condensers, evaporators and heat exchangers; tubes for carrying seawater; valve bodies; pump bodies and impellers.   Related Specifications of 70/30:

• CN107
• C71500
• C71520
• CW354H
• DEF STAN 02-879 Annex B
• DEF STAN 02-780
• NES780
• BS2874
• EN 12164
• ASTM B151
• DGS320
• 2.0882
• CuNi30Mn1Fe

Nominal Composition of 70/30 Cu rem, Ni 30%, Fe 0.7%, Mn 1.0% Mechanical Properties of 70/30

Ultimate Tensile Strength (N/mm²)	Proof Stress (N/mm²)	Elongation (%)	Hardness (HB)
310		27	80-120

Key Features of 70/30:

• Excellent corrosion and pitting resistance in marine environments
• Good strength and toughness
• Resistance to biofouling
• Readily weldable and fabricated

Applications of 70/30: Offshore marine: Salt water flanges, salt water piping and pipe fittings, valve bodies, sea water intakes, pipe fittings, water boxes, propeller sleeves, pump bodies and parts Chemical processing: Heat exchanger and cooling plant, evaporator tubes, distiller tubes, refrigerator and condenser components Other: Welding backing rings, flexible metal hose, weld wire and boiler parts