Massive Selection for Large Diameter Stainless Steel Tube - Nimonic Alloy 80A – Nimonic Alloy Bar/Sheet/Pipe – Cepheus

NIMONIC Alloy 80A (UNS N07080)

NIMONIC alloys are primarily composed of nickel and chromium. These alloys are known for their high-temperature low-creep and high performance. Additives like aluminium, carbon and titanium are infused into the alloy. The NIMONIC alloy was first developed in 1940 in England. NIMONIC alloys available commercially are NIMONIC 75, NIMONIC 80A, 81, 86, NIMONIC PE11 and 16. NIMONIC alloy 80A is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. It is manufactured by high-frequency melting and casting in air. It is similar to NIMONIC alloy 75. It has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F). This datasheet will look into the chemical composition, properties and applications of NIMONIC alloy 80A.

Chemical Composition

The chemical composition of NIMONIC alloy 80A is given in the following table.
Element Content (%)
Nickel, Ni 69
Chromium, Cr 18-21
Iron, Fe ≤3
Cobalt, Co ≤2
Titanium, Ti 1.8-2.7
Aluminum, Al 1.0-1.8
Others Remainder

Physical Properties

The following table discusses the physical properties of NIMONIC alloy 80A.
Properties Metric Imperial
Density 8.19 gm/cm3 0.296 lb/in3

Mechanical Properties

The mechanical properties of NIMONIC alloy 80A are tabulated below.
Properties Metric Imperial
Tensile strength(annealed) 1250 MPa 181 ksi
Yield strength(annealed) 780 MPa 113 ksi
Elongation at Break 30% 30%
  Some of the other designations that are used to denote NIMONIC alloy 80A are as below:-
  • UNS N07080
  • BS 3076
  • HR1
  • HR401
  • HR601
  • HR201
  • ASTM B637
  • DIN 17742
  • DIN17754
 

  • Massive Selection for Large Diameter Stainless Steel Tube - Nimonic Alloy 80A – Nimonic Alloy Bar/Sheet/Pipe – Cepheus Related Video: