News

Phosphor Bronze: Sheets & Strips

Phosphor Bronze: Sheets & Strips * Please contact Harada Metal Industry for non-standard and out of range requirements for chemical compositions, mechanical properties and thicknesses of the Standard. Chemical Components Alloy Code Chemical Composition (%) Sn P Fe Pb Zn Cu+Sn+P C5050 1... Read More

Copper-Nickel Alloys: CuNi44

Copper-Nickel Alloys: CuNi44 49 AlloyCuNi44 offers high electrical resistivity and very low temperature coefficient of resistance (TCR). Due to its low TCR, it finds use in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of developing a high and c... Read More

Nickel-Copper Alloys: Wire / Strip / Bar

Nickel-Copper Alloys: Wire / Strip / Bar JLC 400is a nickel-copper, solid-solution alloy that offers good strength and toughness over a wide temperature range, including sub-zero temperatures. It provides excellent corrosion resistance and is also resistant to stress corrosion cracking and pitt... Read More

Nickel-Manganese Alloys: Wire / Strip / Ribbon

Nickel-Manganese Alloys: Wire / Strip / Ribbon Ni 211Nickel 211 is similar to Nickel 200 with manganese addition to improve resistance against sulfur at high temperatures. This allows for the use of this alloy in applications where sulfur is present in heating flames, such as in proximity to gl... Read More

Nickel Alloys Applications

Nickel Alloys  Applications Nickel 200 and 201 alloys are used as leads for electrical & electronic components & as lead-in-wire components for lamps. They are used in making wire mesh & filters for chemical & petrochemical industry. They are also used in Ni-Cd batteries, for weld... Read More

Nickel Alloys: Standard Nickel Grades

Nickel Alloys: Standard Nickel Grades Ni 200Nickel 200 is the most widely used standard grades of commercially available pure wrought Nickel alongwith and Nickel 201. These alloys offer good thermal conductivity, mechanical properties, resistance against many corrosive environments, in particul... Read More

C5210 Qsn 8 – 0.3 Standard Alloy Foils / Bronze Foil With Maximum Width 650mm

Bronzes are typically very ductile alloys. By way of comparison, most bronzes are considerably less brittle than cast iron. Typically bronze only oxidizes superficially; once a copper oxide (eventually becoming copper carbonate) layer is formed, the underlying metal is protected from further corr... Read More

Stainless seamless steel pipe ASTM A312 TP316L

316 L is a chromium-nickel molybdenum austenitic stainless steel developed to provide improved corrosion resistance to Alloy 304/304L in moderately corrosive environments. It is often utilized in process streams containing chlorides or halides. The addition of molybdenum improves general corrosio... Read More

310 Stainless Steel Bar UNS S31000 (Grade 310)

310 Stainless Steel Bar UNS S31000 (Grade 310) 310 stainless steel bar, also known as UNS S31000 and Grade 310, contains the following primary elements: .25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% chromium, 19% to 22% nickel, traces of sulfur and phosphorus, with t... Read More

Super Duplex 2507 Stainless Steel Bar UNS S32750

Super Duplex 2507 Stainless Steel Bar UNS S32750 UNS S32750, commonly known as Super Duplex 2507, is very similar to UNS S31803 Duplex. The difference between the two is the contents of chromium and nitrogen are higher in the Super Duplex Grade which in turn creates higher corrosion resistance as... Read More

321 Stainless Steel Bar UNS S32100 (Grade 321)

321 Stainless Steel Bar UNS S32100 (Grade 321) 321 stainless steel bar, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being i... Read More

Monel 400 Nickel Bar UNS N04400

Monel 400 Nickel Bar UNS N04400 Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile, nickel-copper based alloy comprised essentially of two-thirds nickel and one third copper. Nickel Alloy 400 is known for resistance to a variety of corrosive conditions, including alkalies (or ... Read More
<< < Previous 33343536373839 Next > >> Page 36 / 54