316Ti Stainless Steel Strip
Quality Stainless Steel Strip Grade:
ASTM 316Ti
JIS SUS316Ti
EN 1.4571
316Ti Stainless Steel StripSpecifications
- Grade: 316Ti
- Standard: ASTM/EN/JIS
- Thickness: 0.03mm-3.0 mm
- Width: 1.5mm-600 mm
- Length: coil type or it can be produced as customer requirements
- Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
- Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
316Ti Stainless Steel Strip Introductions
Grade 316Ti
stainless steel strip contains a small amount of titanium content. Titanium content is typically only around 0.2% to 0.7%.
The titanium atoms stabilise the structure of the grade 316 material at temperatures over 800 degree.
This prevents carbide precipitation at the grain boundaries and protects the metal strips from corrosion.
The main advantage of 316Ti stainless steel strip is that it can be held at higher temperatures for a longer period without sensitisation (precipitation) occurring.
And 316Ti strip retains physical and mechanical properties similar to standard grade of 316 strip.
316Ti Stainless Steel Strip Applications
The titanium content is added in grade 316 stainless steel to improve the resistance to intergranular corrosion.
So 316Ti stainless steel strip is widely used in chemical industry which has higher acid condition.
316Ti Stainless Steel Strip Chemical Composition
The chemical components of grade 316Ti stainless steel strip is summarized in the following table:
Grade |
Standard |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Ti |
316Ti |
ASTM A240 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.035 |
≤0.030 |
16.00-19.00 |
11.00-14.00 |
0.2-0.7 |