Stainless Steel 310S Wire, UNS S31008 Wiremesh, SS 310S Filler Wire, SS 310S Welding Wire, SS 310S Coils

Stainless Steel 310S Wire, UNS S31008 Wiremesh, SS 310S Filler Wire, SS 310S Welding Wire, SS 310S Coils

ASTM A164 Stainless Steel 310S Wire, werkstoff nr. 1.4845 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 
Standard SS 310S
UNS S31008
WERKSTOFF NR. / DIN 1.4845
   

STAINLESS STEEL 310S WIRE SPECIFICATION :

Standard : 310S / 1.4845 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S31008 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Mo Ni N
310S 0.08 max 2 max 1.50 max 0.045 max 0.03 max 24 – 26 - 19 – 22 -
 

STEEL 310S WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000, MPa – 515
Yield Strength (0.2%Offset) Psi – 30000, MPa – 205
Elongation 35 %

TYPES OF STAINLESS STEEL 310S WIRE :

  • Stainless Steel 310S Wire Bobbin
  • Stainless Steel 310S Wire Coil
  • Stainless Steel 310S Filler Wire
  • Stainless Steel 310S Welding Wire
  • SS 310S Wire Coil
  • SS 310S Wire Bobbin
  • AISI 310S Wire
  • SS UNS S31008 Wire
  • SS Nr. 1.4845 Wire
  • UNS S31008 Filler Wire
  • UNS S31008 Wire Bobbin
  • AISI 310S Filler Wire
  • SS 310S Wiremesh
  • AISI 310S Wire Bobbin