Stainless Steel 316 Shim Sheets

Stainless Steel 316 Shim Sheets

 

Stainless Steel 316 Shim Sheet Specification

Standard : ASTM / ASME A240 / SA240 Width : 14' (355 MM) to 2' (610 MM) Thickness : 0.05 MM thickness, 0.10 MM, 0.15 MM, 0.20 MM, 0.25 MM, 0. 30 MM, 0. 35 MM, 0.40 MM Form : Decorative Round Hole, Dimpled, Square Holes, Gold Mirror Round Hole, Round Punch, Etched, Colored Shim Sheets Finish : 2B, BA Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Equivalent Grades of SS 316 Shim Sheet

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 - Z7CND17-11-02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Stainless Steel 316 Shim Sheet Chemical Composition

Element SS 316
C 0.08 max
Mn 2.0 max
Si 1.0 max
P 0.045 max
S 0.030 max
Cr 16 – 18
Ni 11 – 14
Mo 2 – 3
Fe 67.845 min

Mechanical Properties of SS 316 Shim Sheet

Element SS 316
Density 8.0 g/cm3
Melting Point 1400 °C (2550 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

Types of SS 316 Shim Sheets

Stainless Steel 316 Shim Sheet
 SS 316 Shim Sheet A240 SS 316 Shim Sheets UNS S31600 Shim Sheets WERKSTOFF NR. 1.4401 Shim Sheet 2B Finish SS 316 Shim Sheet Stainless Steel 316 Shims
SS 316 Cold Rolled Shim Sheets
 SS 316 Cold Rolled Shim Sheets A240 SS 316 Cold Rolled Shim Sheet S31600 Cold Rolled Shim Sheets WERKSTOFF NR. 1.4401 Cold Rolled Shim Sheets SS 316 2b finish Cold Rolled Shim Sheet SS 316 CR Shims
SS 316 Hot Rolled Shim Sheets
 SS 316 Hot Rolled Shim Sheets A240 SS 316 Hot Rolled Shim Sheet UNS S31600 Hot Rolled Shim Sheet 1.4401 Hot Rolled Shim Sheet SS 316 2b finish Hot Rolled Shim Sheets SS 316 HR Shims