Stainless Steel 321H Wire
ASTM A164 Stainless Steel 321H Wire, werkstoff nr. 1.4878 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.
| Standard |
SS 321H |
| UNS |
S32109 |
| WERKSTOFF NR. / DIN |
1.4878 |
STAINLESS STEEL 321H WIRE SPECIFICATION :
Standard : 321H / 1.4878
Range : 0.10mm to 8.00mm Required Size
Designation : ASTM A164, ASME SA164
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
UNS S32109 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:
| Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Ti |
| 321H |
0.04 - 0.10 |
2 max |
0.75 max |
0.045 max |
0.03 max |
17 - 19 |
3 - 4 |
9 - 12 |
- |
4xC min
0.60% max |
STEEL 321H WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:
| Density |
8.0 g/cm3 |
| Melting Point |
1454 °C (2650 °F) |
| Tensile Strength |
Psi - 75000 , MPa - 515 |
| Yield Strength (0.2%Offset) |
Psi - 30000 , MPa - 205 |
| Elongation |
35 % |
TYPES OF STAINLESS STEEL 321H WIRE :
- Stainless Steel 321H Wire Bobbin
- Stainless Steel 321H Wire Coil
- Stainless Steel 321H Filler Wire
- Stainless Steel 321H Welding Wire
- SS 321H Wire Coil
- SS 321H Wire Bobbin
- AISI 321H Wire
- SS UNS S32109 Wire
- SS Nr. 1.4878 Wire
- UNS S32109 Filler Wire
- UNS S32109 Wire Bobbin
- AISI 321H Filler Wire
- SS 321H Wiremesh
- AISI 321H Wire Bobbin