STAINLESS STEEL SPRING MATERIAL STEEL TYPE : 304 / 301 / 316 / 430 / 420J2

Product Detail

JIS SUS301-CSP 1/4H 1/2H 3/4H FH EH Cold Rolled Stainless Steel Strip In Coils

SUS301-CSP EH JIS G 4313 Cold Rolled Stainless Steel Strip Deburred Edges Bright Finish

Stainless Steel ASTM 301 EN 1.4310 SUS301 1/2H 3/4H FH EH SH Precision Strip

301 FULL HARD TEMPERED STAINLESS STEEL SHEET & COIL - AMS 5519

SUS 301 Stainless Steel Strip Coil for Springs 1/2 Hard 3/4H Full Hard

SUS 301 Strip Coil 301 Stainless Steel Strip Coil 301 Slit Coil for Springs 1/2 Hard 3/4H Full Hard EN 10151 1.4310 ( 301 ) Stainless Steel Strip And Cut Sheets For Springs EN 10151 Stainless steel strip for springs, Austenitic grade W.-nr. 1.4310 DIN X10CrNi18-8, strip is usually supplied in coils, or may be supplied in cut lengths, sheet.

Grade	C	Si	Mn	P	S	Cr	Ni	Mo	N
1.4310	0.05~0.15	2.00 max.	2.00 max.	0.045 max.	0.015 max.	16.00~19.00	6.00~9.50	0.80 max.	0.11 max.

Mechanical properities of stainless strip for springs - grade 1.4310, 301

Temper symbol	Hardness HV	Yield strength N/mm2	Tensile strength N/mm2	Elongation %
1/2H	310 min.	510 min.	930 min.	10 min.
3/4H	370 min.	745 min.	1130 min.	5 min.
FH	430 min.	1030 min.	1320 min.	-
EH	490 min.	1275 min.	1570 min.	-

Product forms 1.4310, 301 stainless steel narrow strip, thin strip, precision strip, slit strip, sheets We offer small quantities with short delivery times.

Product Specification

Thickness	Max 1.5mm	Min 0.10mm
Width	400 mm	Min 1.5 mm

Thickness Tolerance G4313

Thickness (mm)	JIS	Standard (+/-mm)	Precision (+/-mm)
0.10~0.14	0.020	0.008	0.005
0.15~0.19	0.030	0.010	0.008
0.20~0.29	0.035	0.020	0.010
0.30~0.49	0.040	0.025	0.010
0.50~0.80	0.045	0.030	0.015
0.80~1.00	0.050	0.035	0.015
1.00~1.50	0.050	0.040	0.020

Width Tolerance

Thicknes Width	<0.15mm	0.15~0.60mm	0.60~1.00mm	1.00~1.50mm
<10mm	+0/-0.05	+/-0.05	+/-0.10
10~200mm	+/-0.05	+/-0.05	+/-0.10	+/-0.10
200~300mm	+/-0.05	+/-0.05	+/-0.10	+/-0.10

Mechanical Properties of Stainless Steel Strip for Springs G4313

Grade	Temper	As Cold Rolled Or Solution Heat Treated			Elongation%
Grade	Temper	Hardness HV	Yield Strength N/mm2	Tensile Strength N/mm2	Elongation%
SUS 301	1/2 H 3/4 H FH EH SEH	310~370 370~430 430~490 490~530 530~600	510 Min 745 Min 1030 Min 1275 Min 1450 Min	930 Min 1130 Min 1320 Min 1570 Min 1740 Min	10 Min 5 Min
SUS 304	SOFT 1/2 H 3/4 H FH	200 Max 250~310 310~370 370~430	205 Min 470 Min 665 Min 885 Min	520 Min 780 Min 930 Min 1130 Min	40 Min 6 Min 3 Min
AISI 316L	SOFT	200 Max	175 Min	480 Min	40 Min
SUS 430	SOFT	200 Max	205 Min	450 Min	22 Min
SUS 420J2	SOFT	247 Max	225 Min	540 Min	18 Min

Stainless Steel Chemical Composition

Grade	Chemical Composition%
Grade	C	Si	Mn	P	S	Cr	Ni	Mo
SUS 301	0.15 max	1.00 max	2.00 max	0.045 max	0.030 max	16.00~18.00	6.00~8.00
SUS 304	0.08 max	1.00 max	2.00 max	0.045 max	0.030 max	18.00~20.00	8.00~10.00
AISI 316L	0.030 max	1.00 max	2.00 max	0.045 max	0.030 max	16.00~18.00	10.00~14.00	2.00~3.00
SUS 430	0.12 max	0.75 max	1.00 max	0.040 max	0.030 max	16.00~18.00
SUS 420J2	0.26~0.40	1.00 max	1.00 max	0.040 max	0.030 max	12.00~14.00