UNS S32100 Wire

Stainless Steel 321 Wire, UNS S32100 Wiremesh, SS 321 Filler Wire, SS 321 Welding Wire, SS 321 Coils

 

ASTM A164 Stainless Steel 321 Wire, werkstoff nr. 1.4541 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 
Standard SS 321
UNS S32100
WERKSTOFF NR. / DIN 1.4541
   

STAINLESS STEEL 321 WIRE SPECIFICATION :

Standard : 321 / 1.4541 Range : 0.10mm to 8.00mm Required Size   Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S32100 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Mo Ni N Ti
321 0.08 max 2 max 0.75 max 0.045 max 0.03 max 17 – 19 3 – 4 9 – 12 0.10 max 5xC min 0.60% max
 

STEEL 321 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

TYPES OF STAINLESS STEEL 321 WIRE :

  • Stainless Steel 321 Wire Bobbin
  • Stainless Steel 321 Wire Coil
  • Stainless Steel 321 Filler Wire
  • Stainless Steel 321 Welding Wire
  • SS 321 Wire Coil
  • SS 321 Wire Bobbin
  • AISI 321 Wire
  • SS UNS S32100 Wire
  • SS Nr. 1.4541 Wire
  • UNS S32100 Filler Wire
  • UNS S32100 Wire Bobbin
  • AISI 321 Filler Wire
  • SS 321 Wiremesh
  • AISI 321 Wire Bobbin
Standard SS 321H
UNS S32109
WERKSTOFF NR. / DIN 1.4878
   

STAINLESS STEEL 321H WIRE SPECIFICATION :

Standard : 321H / 1.4878 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S32109 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Mo Ni N Ti
321H 0.04 - 0.10 2 max 0.75 max 0.045 max 0.03 max 17 - 19 3 - 4 9 - 12 - 4xC min 0.60% max
 

STEEL 321H WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset) Psi - 30000 , MPa - 205
Elongation 35 %

TYPES OF STAINLESS STEEL 321H WIRE :

  • Stainless Steel 321H Wire Bobbin
  • Stainless Steel 321H Wire Coil
  • Stainless Steel 321H Filler Wire
  • Stainless Steel 321H Welding Wire
  • SS 321H Wire Coil
  • SS 321H Wire Bobbin
  • AISI 321H Wire
  • SS UNS S32109 Wire
  • SS Nr. 1.4878 Wire
  • UNS S32109 Filler Wire
  • UNS S32109 Wire Bobbin
  • AISI 321H Filler Wire
  • SS 321H Wiremesh
  • AISI 321H Wire Bobbin