, UNS S32100 Wiremesh, SS 321 Filler Wire, SS 321 Welding Wire, SS 321 Coils

Stainless Steel 321 Wire, UNS S32100 Wiremesh, SS 321 Filler Wire, SS 321 Welding Wire, SS 321 Coils

 

ASTM A164 Stainless Steel 321 Wire, werkstoff nr. 1.4541 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.

 

Standard	SS 321
UNS	S32100
WERKSTOFF NR. / DIN	1.4541

   

STAINLESS STEEL 321 WIRE SPECIFICATION :

Standard : 321 / 1.4541 Range : 0.10mm to 8.00mm Required Size   Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S32100 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Ti
321	0.08 max	2 max	0.75 max	0.045 max	0.03 max	17 – 19	3 – 4	9 – 12	0.10 max	5xC min 0.60% max

 

STEEL 321 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

TYPES OF STAINLESS STEEL 321 WIRE :

Standard	SS 321H
UNS	S32109
WERKSTOFF NR. / DIN	1.4878

   

STAINLESS STEEL 321H WIRE SPECIFICATION :

Standard : 321H / 1.4878 Range : 0.10mm to 8.00mm Required Size Designation : ASTM A164, ASME SA164 Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)  

UNS S32109 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Ti
321H	0.04 - 0.10	2 max	0.75 max	0.045 max	0.03 max	17 - 19	3 - 4	9 - 12	-	4xC min 0.60% max

 

STEEL 321H WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:

Density	8.0 g/cm3
Melting Point	1454 °C (2650 °F)
Tensile Strength	Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset)	Psi - 30000 , MPa - 205
Elongation	35 %

TYPES OF STAINLESS STEEL 321H WIRE :