Factory Cheap Stainless Steel Half Round Bar – 904L stainless steel plate – Cepheus

 

904L Stainless Steel Sheet Range

904L Stainless Steel Sheet Specification ASTM A240 / ASME SA240
904L Stainless Steel Sheet Manufacturing Process Hot Rolled (HR) / Cold Rolled (CR)
904L Stainless Steel Sheet Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
904L Stainless Steel Sheet Thickness 0.6 MM TO 80 MM THICKNESS
904L Stainless Steel Sheet Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
904L Stainless Steel Sheet Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement

904L Stainless Steel Sheet Chemical Compostion and Properties

The chemical composition of grade 904L Stainless Steel is outlined in the following table
Grade C Mn Si P S Cr Mo Ni Cu
904L min. max. - 0.02 - 2 - 1 - 0.045 - 0.035 19 23 4 5 23 28 1 2

904L Stainless Steel Sheet Mechanical and Physical Properties

The mechanical properties of grade 904L Stainless Steel Sheets are displayed in the following table.
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) Brinell (HB)
904L 490 220 36 70-90 typical 150

904L STAINLESS STEEL SHEETS PHYSICAL PROPERTIES

Physical properties of 347 grade stainless steel in the annealed condition
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Elec Resistivity (nΩ.m)
0-100°C 0-315°C 0-538°C At 20°C At 500°C
904L 7900 190 15 - - 11.5 - 500 952

904L  Stainless Steel Sheet Available Other Grade

Possible alternative grades to 316H grade stainless steel
EN-standard Steel no. k.h.s DIN EN-standard Steel name SAE grade UNS
1.4109 X65CrMo14 440A S44002
1.4112 X90CrMoV18 440B S44003
1.4125 X105CrMo17 440C S44004
440F S44020
1.4016 X6Cr17 430 S43000
1.4408 G-X 6 CrNiMo 18-10 316 S31600
1.4512 X6CrTi12 409 S40900
410 S41000
1.4310 X10CrNi18-8 301 S30100
1.4318 X2CrNiN18-7 301LN
1.4307 X2CrNi18-9 304L S3043
1.4306 X2CrNi19-11 304L S30403
1.4311 X2CrNiN18-10 304LN S30453
1.4301 X5CrNi18-10 304 S30400
1.4948 X6CrNi18-11 304H S30409
1.4303 X5CrNi18-12 305 S30500
X5CrNi30-9 312
1.4841 X22CrNi2520 310 S31000
1.4845 X 5 CrNi 2520 310S S31008
1.4541 X6CrNiTi18-10 321 S32100
1.4878 X12CrNiTi18-9 321H S32109
1.4404 X2CrNiMo17-12-2 316L S31603
1.4401 X5CrNiMo17-12-2 316 S31600
1.4406 X2CrNiMoN17-12-2 316LN S31653
1.4432 X2CrNiMo17-12-3 316L S31603
1.4435 X2CrNiMo18-14-3 316L S31603
1.4436 X3CrNiMo17-13-3 316 S31600
1.4571 X6CrNiMoTi17-12-2 316Ti S31635
1.4429 X2CrNiMoN17-13-3 316LN S31653
1.4438 X2CrNiMo18-15-4 317L S31703
1.4362 X2CrNi23-4 2304 S32304
1.4462 X2CrNiMoN22-5-3 2205 S31803/S32205
1.4501 X2CrNiMoCuWN25-7-4 J405 S32760
1.4539 X1NiCrMoCu25-20-5 904L N08904
1.4529 X1NiCrMoCuN25-20-7 N08926
1.4547 X1CrNiMoCuN20-18-7 254SMO S31254